Modine PDP150 150,000 BTU Vertical Powered Vented Unit NG Heater 115V

Usually Leaves Warehouse in 3 - 5 Business Days
Sku:
MODINE-PDP150
At 115 volts and 150,000 BTUs input /120,000 BTUs output, you can add this power vented heater to many commercial locations. It can be mounted up to 16 feet (from the bottom of the unit) high, and vented either vertically or horizontally. The power exhaust can be rotated 180°.
 
Featuring 80% thermal efficiency, these unit heaters use a collector box and power exhauster for maximum seasonal efficiency. These units are designed to use the smallest diameter vent pipe possible. The Modine PDP units use a 100% shut-off, intermittent pilot-ignition system with continuous retry. This allows for field conversion from natural gas to liquid propane.
 
Standard features include a time delay relay which allows warm air to be expelled at the onset and continues to release the residual warm air from the exchanger once the temperature is reached.
 
Other standard features include:
  • Control Step Down Transformer
  • High Limit Switch: If the limit temperature is exceeded, the gas controls are de-energized until the switch is cooled
  • Pressure Switch: A automatic reset vent pressure switch prevents operation if there is a problem detected in the venting. Once this problem is corrected the pressure switch will reset automatically
$1,139.00
Modine PDP150 150,000 BTU Vertical Powered Vented Unit NG Heater 115V
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
At 115 volts and 150,000 BTUs input /120,000 BTUs output, you can add this power vented heater to many commercial locations. It can be mounted up to 16 feet (from the bottom of the unit) high, and vented either vertically or horizontally. The power exhaust can be rotated 180°.
 
Featuring 80% thermal efficiency, these unit heaters use a collector box and power exhauster for maximum seasonal efficiency. These units are designed to use the smallest diameter vent pipe possible. The Modine PDP units use a 100% shut-off, intermittent pilot-ignition system with continuous retry. This allows for field conversion from natural gas to liquid propane.
 
Standard features include a time delay relay which allows warm air to be expelled at the onset and continues to release the residual warm air from the exchanger once the temperature is reached.
 
Other standard features include:
  • Control Step Down Transformer
  • High Limit Switch: If the limit temperature is exceeded, the gas controls are de-energized until the switch is cooled
  • Pressure Switch: A automatic reset vent pressure switch prevents operation if there is a problem detected in the venting. Once this problem is corrected the pressure switch will reset automatically
  • Heating BTUs:
    150000
  • Heating BTUs (Output):
    120000
  • Type of Venting:
    B-Vent
  • Mounting:
    Ceiling
  • Thermal Efficiency:
    80%
  • Blower:
    Not Available
  • CFMs:
    2180
  • Vent Connection Size (in.):
    5
  • Gas Connection Size:
    1/2"
  • Ignition Type:
    Electronic Ignition
  • Clearance to Side Wall (in.):
    1
  • Clearance Top to Ceiling (in.):
    4
  • Clearance Bottom to Floor:
    12
  • Clearance Access Door Side:
    1
  • Width (in.):
    21
  • Depth (in.):
    22
  • Height (in.):
    35.25
  • Net Weight (lbs.):
    168