Free Shipping on All Orders - Every Product, Every Time!
Product Overview
Whether it's a residential or commercial garage, woodworking shop or other industrial area, the Hot Dawg HD45AS0111 45,000 BTU Garage Heater is up to the task of warming your space. The Hot Dawg heaters hang from the ceiling, feature quiet operation and install easily. The QuickSling Flush Mount (QSWI3000) mounting bracket, which includes all the hardware required for flush mount installation, is available separately. The QSWI3000 is suitable to hold up to 200 pounds. Additionally, the HD45AS0111 must be vented outside either horizontally or vertically with 3" venting. A venting system is required but is not supplied with the unit and must be purchased separately in the field.The HD Model draws its heat from within the space being heated and vents to the outside. The venting system is not supplied with the unit and must be purchased separately. The Hot Dawg installs quickly and easily with field wiring connections and knockouts for quick access to gas and electricity. And it uses standard household voltage.
The HD45AS0111 is powerful enough for a two car to a two and a half car garage, or any similar sized commercial or industrial space. The Hot Dawg heater works with any standard or programmable thermostat, the kind generally found in your home.
- Quiet operation
- Low profile design and neutral color
- Standard power exhaust simplifies side-wall or roof venting with small-diameter vent pipe
- Permanently lubricated motor for trouble-free dependability
- Adjustable louvers
- Full 10 year warranty on heat exchanger
- Single Stage, Direct Spark Ignition, 100% Shut-Off with Continuous Retry: Utilizes a single-stage combination gas control with ignition control. Gas is lit with a direct spark igniter on call for heat
The HD45AS0111 heater is Natural Gas with an optional Liquid Propane Conversion Kit (53079) sold separately above.
This unit requires gas, vent and electrical connections. Modine strongly recommends having a licensed HVAC technician install your Hot Dawg gas heater.
Tech Specs
-
- Style:
- Ceiling Mount
-
- Fuel Type:
- Natural Gas (NG)
-
- Separated Combustion Chamber:
- No
-
- Heating BTUs (Input):
- 45000
-
- Heating BTUs (Output):
- 36000
-
- Thermal Efficiency:
- 80%
-
- CFMs:
- 720
-
- Gas Connection Size:
- 1/2"
-
- Vent Connection Size (in.):
- 3
-
- Circuit Breaker Size (Amps):
- 15
-
- Voltage:
- 110-120V
-
- Noise Level (dBA):
- 57
-
- Clearance to Rear Wall (in.):
- 18
-
- Clearance to Side Wall (in.):
- 1
-
- Clearance Top to Ceiling (in.):
- 1
-
- Clearance Bottom to Floor:
- 1
-
- Clearance Access Door Side:
- 1
-
- Width (in.):
- 26.8
-
- Depth (in.):
- 12.2
-
- Height (in.):
- 18.5
-
- Net Weight (lbs.):
- 60
-
- Parts Warranty:
- 2 Years
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
