HeatStar by Enerco offers gas powered, vent free heating options for your warmth and comfort. The HSVFBF10 10,000 BTU Blue Flame heater is available in Natural Gas. It is a great option for supplemental heat in areas that are about 250 square feet. Blue Flame heaters heat the air in the room. Heating the air in a well insulated room will help keep you warmer longer. Although they may take a little longer for you to feel their warmth, because the air is heated, not the objects in a room, there is little downside to installing a blue flame heater.
Blue flame heaters are extremely economical, operating at 99.9% efficiency and the HeatStar heaters feature a built-in low oxygen shut-off sensor for safety.
This heater includes both the wall mount bracket as well as base feet. This gives you installation options best suited to your needs. One of the perks of this 10000 BTU Blue Flame heater is the option to install it into a bedroom! For wall mounting, it is suggested that it be mounted 36 inches from the floor for accessibility. However, clearance to the floor when using the feet is a minimum of 3 inches (to the top of carpet). Clearance above the unit should be a minimum of 36 inches, while clearance on either side should be at least 10 inches.
This heater includes a convenient Piezo ignition built right into the rotation of the control knob for easy ignition. The thermostatic control knob offers 5 settings and modulates the flame as the temperature gets closer to the set point. The burner will cycle on and off based on the set temperature. Because it is gas powered, it will keep you warm, without electricity, during power outages. The blower fan will not operate during a power outage, but the heater will still generate heat to keep you warm and comfortable.
The 10,000 BTU blue flame heater is available in Natural Gas (HSVFBF10NG) and Liquid Propane (HSVFBF10LP).
Vent-Free Products Cannot Be Shipped To The State Of California.