AquaMotion AMH2K-7N On-Demand Recirculation Pump Kit for 3 Pipe Hot Water Tank Installation

Sku:
AQUAMOTION-AMH2K7N
Usually Leaves Warehouse in 2 - 3 Business Days
$417.00
The AquaMotion AMH2K-7N is designed to deliver ON-DEMAND hot water quickly at all points of use between the hot water tank and the dedicated return line. ON-DEMAND gives the homeowner the ability to manually activate the system through a wireless controller. It does not include a timer. When activated, the circulator run time is 5 minutes or until the water temperature reaches 105°F. ON-DEMAND is preferred over pumps with timers when you are trying to save money on electricity.
 
The AMH2K-7N can be operated by a standard wall switch that controls power to the outlet you are using. Aquamotion offers several different wireless controller kits as well. Wireless controller kits include controller and receiver. When adding a wireless controller kit, you also get the option to add up to 4 additional controllers for their ON-DEMAND pumps. Additional controller options include a wireless button (AMK-WBR), a wireless wall switch (AMK-WSR) and a motion sensor (AMK-MSR).
 
The AMH2K-7N is for use with a standard hot water heater with a dedicated return line. This is a 3-pipe system that includes a hot water line, a cold water line, and a dedicated return. This system creates a loop from the water heater to the faucet and back again. The unused hot water is drawn back through this loop by the pump, so when you turn on your hot water faucets, you get hot water quickly. Water is not left in the pipes to get cold, and you waste less water because you don’t have to wait.
 
waterheater diagram
 
Water savings can be as great as 12,000 – 15,000 gallons per year with 4-5 taps in a home. As many homeowners know, you can turn on the faucet and wait for the water to heat up for a very long time - sometimes more than 2 or 3 minutes. That waiting time is wasting energy and countless gallons of water!
 
All of the moving parts of the AquaMotion AMH2K-7 recirculator are housed in a "Green Eco Cartridge Design". It is the only field serviceable and replaceable cartridge available. With this design, simply remove the rotor assembly, flush the cartridge with water and reinstall it. Simple, cost effective, patented technology!
 
Requirements for using the AMH2K-7N include a min./max. water pressure of 20 PSI / 125 PSI with a maximum ambient water temperature of 104°F. Good for up to 250 feet of pipe length. The AMH2K-7N includes everything you need:
  • AM7-SUVA1LT1 Pump with Built-in timer
  • 10 Ft line cord / 3 prong plug
  • 3/8" x 1/2" x 3/8" Compression Tee
  • (2) 3/4" NPT Male Union Tail Pieces 
  • (2) Union Nuts and Gaskets
  • Installation and Operating Instructions

Here is a quick reference to confirm that the AMH2K-7 hot water recirculator will work for your needs:

  1. You DO have a Dedicated Return Line
  2. You have a Standard Storage Tank Hot Water Heater (NOT a Tankless)

If you are looking for the same pump but with a timer and the ability to run continuously, take a look at the AquaMotion AMH2K-7.

AquaMotion - Designed, Built and Tested in the US. AquaMotion pumps are covered by a 3 year limited warranty. Please email us at info@AquaMotionHVAC.com and we will work with you to troubleshoot any problems you may have with your AquaMotion Pump.

 

 

FREE SHIPPING ON ALL ORDERS!
AquaMotion AMH2K-7N On-Demand Recirculation Pump Kit for 3 Pipe Hot Water Tank Installation
Product Video

Product Overview

The AquaMotion AMH2K-7N is designed to deliver ON-DEMAND hot water quickly at all points of use between the hot water tank and the dedicated return line. ON-DEMAND gives the homeowner the ability to manually activate the system through a wireless controller. It does not include a timer. When activated, the circulator run time is 5 minutes or until the water temperature reaches 105°F. ON-DEMAND is preferred over pumps with timers when you are trying to save money on electricity.
 
The AMH2K-7N can be operated by a standard wall switch that controls power to the outlet you are using. Aquamotion offers several different wireless controller kits as well. Wireless controller kits include controller and receiver. When adding a wireless controller kit, you also get the option to add up to 4 additional controllers for their ON-DEMAND pumps. Additional controller options include a wireless button (AMK-WBR), a wireless wall switch (AMK-WSR) and a motion sensor (AMK-MSR).
 
The AMH2K-7N is for use with a standard hot water heater with a dedicated return line. This is a 3-pipe system that includes a hot water line, a cold water line, and a dedicated return. This system creates a loop from the water heater to the faucet and back again. The unused hot water is drawn back through this loop by the pump, so when you turn on your hot water faucets, you get hot water quickly. Water is not left in the pipes to get cold, and you waste less water because you don’t have to wait.
 
waterheater diagram
 
Water savings can be as great as 12,000 – 15,000 gallons per year with 4-5 taps in a home. As many homeowners know, you can turn on the faucet and wait for the water to heat up for a very long time - sometimes more than 2 or 3 minutes. That waiting time is wasting energy and countless gallons of water!
 
All of the moving parts of the AquaMotion AMH2K-7 recirculator are housed in a "Green Eco Cartridge Design". It is the only field serviceable and replaceable cartridge available. With this design, simply remove the rotor assembly, flush the cartridge with water and reinstall it. Simple, cost effective, patented technology!
 
Requirements for using the AMH2K-7N include a min./max. water pressure of 20 PSI / 125 PSI with a maximum ambient water temperature of 104°F. Good for up to 250 feet of pipe length. The AMH2K-7N includes everything you need:
  • AM7-SUVA1LT1 Pump with Built-in timer
  • 10 Ft line cord / 3 prong plug
  • 3/8" x 1/2" x 3/8" Compression Tee
  • (2) 3/4" NPT Male Union Tail Pieces 
  • (2) Union Nuts and Gaskets
  • Installation and Operating Instructions

Here is a quick reference to confirm that the AMH2K-7 hot water recirculator will work for your needs:

  1. You DO have a Dedicated Return Line
  2. You have a Standard Storage Tank Hot Water Heater (NOT a Tankless)

If you are looking for the same pump but with a timer and the ability to run continuously, take a look at the AquaMotion AMH2K-7.

AquaMotion - Designed, Built and Tested in the US. AquaMotion pumps are covered by a 3 year limited warranty. Please email us at info@AquaMotionHVAC.com and we will work with you to troubleshoot any problems you may have with your AquaMotion Pump.

 

 

Tech Specs

Pump Speeds:
1
Water Heater Type:
Storage Tank
Pump Location:
At Water Heater
Power Required:
Yes, At Tank
Control Type:
On-Demand
Plumbing Type:
Dedicated Return Line
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov