A Peninsula vent-free firebox can be installed between two adjacent rooms (with an appropriately built frame). And because no venting is required, you can add a multi-sided firebox between almost any 2 rooms. It does not need to be installed on an exterior wall. As long as there is a gas line, this firebox can ease your back while helping to create a relaxed atmosphere! No more wood to lug and no more ash to clean up - just clean, warm air.
The Breckenridge Peninsula 36" firebox requires a 23" framing depth. The Breckenridge Mulit-Sided Firebox includes your choice of flush face panels or louvered panels. Please be advised, this is only the firebox and liner. Required
items for either firebox are a logset and burner system. Any 18", 24" or 30" Slope Glaze Vista Burner with either Stone River
or Rock Creek
Log Sets. Total Home Supply has a nice selection of options and accessories for the Breckenridge See-Through Firebox. An optional blower is also available. Create the look that is right for you and your home.
The Breckenridge Peninsula Firebox is open on 3 sides. The See-Through Firebox is open on 2 sides and shown installed in the second photos above. The Logset shown in the firebox is not included but can be purchased separately. This item is the firebox and liner ONLY
. The Banded Brick liner is include with this firebox. The logset and burner system and optional blower are each sold separately. Once you have your firebox, you can customize its surround with decorative doors, louvers and more. An extended hood is required when the firebox surround is thicker than 1 inch.
- Hem-bent seams - provide a better seal and eliminate screws and fasteners
- Requires no venting
- Includes hood
- 5 year limited warranty
A Log Set and Burner are Required
for this firebox (sold separately). For this 36" firebox, a 30" Vista Slope Glaze VFSUR Millivolt Burner or 30" Intermittent Pilot Burner is available. The VFSUR burner has a remote available (Not Included) and a Standing Pilot. It is On/Off Remote Ready, and includes a Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats
sold separately). The burner can be installed in a vented or vent-free application. When used in a vented application, it is only certified to be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A damper clamp is included for this purpose. The Vista Slope Glaze VFSUE Intermittent Burner is also available and includes a remote.
All other accessories such as a blower, doors and frames or mantel are optional and also sold separately.
Vent-Free Products Cannot Be Shipped To The State Of California.