Fill your empty fireplace with a White Mountain Hearth Supersized Charred Oak Ceramic Fiber Log Set and a Vented Burner. With a gas line installed, a gas log set can bring your old fireplace back to life without the mess and hassle of wood. Vented burners are certified for use in existing fireplaces and need to be vented through an open chimney or flue. While vented burners feature a higher BTU input, which help to create taller flames, they are not for use as a heat source. When gas logs are used in a vented installation, they are certified for decorative use only and cannot be used with a thermostat. Vented burners are not convertible for use in a vent-free installation.
The Ceramic Fiber Super Charred Oak logs are meticulously hand crafted and painted to simulate natural Oak logs that have started to burn. The attention to detail provides you with the most realistic looking logs. The Super-Sized Charred Oak log set includes 6 logs and offers an outstanding look for just about any gas-equipped fireplace. The log set features unsplit and broken logs, displaying realistic looking cracks and splits as it sits nicely on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch fireplace.
This Super Charred Oak Log Set is available in 18" (LS18-C2S), 24" (LS24-C2S) and 30" (LS30-C2S). Vented burners are ideal for installation in an existing fireplace fitted with a gas line.
Ceramic beads inside the burner tubes force the gas to tumble around, contributing to the authentic flames and flickers between the logs for a beautiful fire. The VSR burner includes a millivolt valve with an On/Off Switch. The VSR burner can be operated with a remote control or wall switch (sold separately - see Accessories below).
Your complete Vented Log Set will include the 6-piece ceramic fiber Supersized Charred Oak Log Set (your choice of size), VSR Slope Glaze Vented Burner Pan Assembly with Millivolt Valve (choice of size and fuel type), Glowing Embers, Damper Clamp, and Decorative Rock. The damper clamp is included to keep the damper from accidentally closing during use. Burners are not field convertible for use with any other fuel type and cannot be used in a vent-free installation.
A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
|VSR Slope Glaze Burner|
with Millivolt Valve
|Input BTUs /|
Reduced Input BTUs*
|18" Burner||65,000 / 40,000 BTUs||28||15||22|
|24" Burner||75,000 / 50,000 BTUs||30||15||22|
|30" Burner||75,000 / 60,000 BTUs||34||15||22|
* An additional main burner orifice is provided to reduce the input of the burner assembly.