White Mountain Hearth Stacked Aged Oak Refractory Log Set offers a dramatic focal point in a vent-free firebox or a gas equipped fireplace. The mighty Oak trees trunk and branches are echoed in this hand-crafted, 8-piece log set. The log set includes both split and unsplit sections of oak logs, exposing the interior imperfections of a fallen oak tree. Featuring the grayish coloring of aged logs, complete with cracks and splits, this log set which stack impressively on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch firebox without getting lost.
With internal ceramic beads forcing the gas to move around inside the burner tubes, the Empire Slope Glaze Burners create a more representative flame pattern, complete with dancing flames through and around the log stack. Vent-free gas logs generate consistent, controlled heat, without the mess, flare-ups and die-downs of a wood-burning fire. Get the look of a wood fire without the hassle of cutting the wood!
Stacked Aged Oak Logs are available in 18" (LS18-SRAO), 24" (LS24-SRAO) and 30" (LS30-SRAO) sizes. To correspond to your log set size, White Mountain Hearth's Slope Glaze Burners are available in 18", 24" and 30" sizes with several valve options to help meet your needs:
- VFSM - Manual (No Remote Available) - operates manually with Off/Pilot/3 position heat setting knob; Cannot be used with wall thermostat or remotes
- VFSR - Millivolt (Remote Available, Not Included) - Standing Pilot, On/Off Remote Ready, Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats - sold separately)
- VFSV - Variable Flame, Height Control (Includes Remote) - Standing pilot with four level flame height control.
- VFSE - Intermittent Pilot (Programmable Remote Included) - Electronic Ignition with Remote Thermostat and Variable Flame Height Control
Both the VFSM (Manual) and VFSV (Variable) models are certified for installation in a vented fireplace. When installed in a vented application, each can only be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A Damper Clamp is included for this purpose.
Your complete set will include the Stacked Aged Oak Logs and Burner/Grate Assembly (size, fuel type and valve chosen), Decorative Rocks, Glowing Embers (rock wool) for burner coverage, Valve Shield (VFSM model) and installation screws and damper clamp. The VFSV and VFSE models will include the Remote Kit.
|BTUs (Min./Max.)||Req. Min. Rear Width (in.) (A)||Req. Min. Depth (in.) (B)||Req. Min. Front Width (in.) (C)||Req. Min. Height (in.) (D)|
|18" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 32,000||21"||14"||32"||17"|
|VFSR- Millivolt Valve:||22,000 / 32,000||17"||14"||28"||17"|
|VFSV- Variable Flame Height:||21,000 / 32,000||17"||14"||28"||17"|
|VFSE- Intermittent Pilot:||26,000 / 32,000||17"||14"||28"||17"|
|24" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 36,000||27"||14"||34"||18"|
|VFSR- Millivolt Valve:||25,000 / 36,000||23"||14"||30"||18"|
|VFSV- Variable Flame Height:||24,000 / 36,000||23"||14"||30"||18"|
|VFSE- Intermittent Pilot:||28,800 / 36,000||23"||14"||30"||18"|
|30" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 38,000||30"||14"||38"||20"|
|VFSR- Millivolt Valve:||26,000 / 38,000||26"||14"||34"||20"|
|VFSV- Variable Flame Height:||27,000 / 38,000||26"||14"||34"||20"|
|VFSE- Intermittent Pilot:||30,000 / 38,000||26"||14"||34"||20"|
A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
State and local codes in some areas prohibit the use of vent free products.
PLEASE CHECK YOUR LOCAL BUILDING CODES BEFORE ORDERING OR INSTALLING A VENT FREE PRODUCT.