White Mountain Hearth Ponderosa Refractory Log Set offers a long lasting focal point in your fireplace. This beautiful 13-piece set is carefully crafted to reflect the beauty of the huge Ponderosa Pine. Standing almost 200 feet tall, the Ponderosa Pine can be found in the southern region of British Columbia, eastern Washington State and further south and east through many states. Each log is hand painted to create the true-to-life look of the dark, yet colorful bark and trunk of both younger and older trees for a most lifelike look. The Ponderosa log set will stack nicely on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch firebox without getting lost.
To create a more authentic burn pattern, complete with flickering flames coming up through the stack, the Slope Glaze Burners feature ceramic beads inside that force the gas to move around in the burner tube. Unlike a wood fire, the hand crafted, Ponderosa vent-free logs generate consistent, controlled heat, eliminating flare-ups and die-downs.
Ponderosa Logs are available in 18" (LS18-P), 24" (LS24-P) and 30" (LS30-P) sizes. White Mountain Hearth's Slope Glaze Burners are available in sizes to match the log sets and offer several valve options to help meet your needs:
- VFSM - Manual (No Remote Available) - operates manually with Off/Pilot/3 position heat setting knob; Cannot be used with wall thermostat or remotes
- VFSR - Millivolt (Remote Available, Not Included) - Standing Pilot, On/Off Remote Ready, Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats - sold separately)
- VFSV - Variable Flame, Height Control (Includes Remote) - Standing pilot with four level flame height control.
- VFSE - Intermittent Pilot (Programmable Remote Included) - Electronic Ignition with Remote Thermostat and Variable Flame Height Control
Both the VFSM (Manual) and VFSV (Variable) models are certified for installation in a vented fireplace. When installed in a vented application, each can only be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A Damper Clamp is included for this purpose.
Your complete set will include the Ponderosa Logs and Burner/Grate Assembly (size, fuel type and valve chosen), Decorative Rocks, Glowing Embers (rock wool) for burner coverage, Valve Shield (VFSM model) and installation screws and damper clamp. The VFSV and VFSE models will include the Remote Kit.
|BTUs (Min./Max.)||Req. Min. Rear Width (in.) (A)||Req. Min. Depth (in.) (B)||Req. Min. Front Width (in.) (C)||Req. Min. Height (in.) (D)|
|18" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 32,000||21"||14"||32"||17"|
|VFSR- Millivolt Valve:||22,000 / 32,000||17"||14"||28"||17"|
|VFSV- Variable Flame Height:||21,000 / 32,000||17"||14"||28"||17"|
|VFSE- Intermittent Pilot:||26,000 / 32,000||17"||14"||28"||17"|
|24" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 36,000||27"||14"||34"||18"|
|VFSR- Millivolt Valve:||25,000 / 36,000||23"||14"||30"||18"|
|VFSV- Variable Flame Height:||24,000 / 36,000||23"||14"||30"||18"|
|VFSE- Intermittent Pilot:||28,800 / 36,000||23"||14"||30"||18"|
|30" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 38,000||30"||14"||38"||20"|
|VFSR- Millivolt Valve:||26,000 / 38,000||26"||14"||34"||20"|
|VFSV- Variable Flame Height:||27,000 / 38,000||26"||14"||34"||20"|
|VFSE- Intermittent Pilot:||30,000 / 38,000||26"||14"||34"||20"|
A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
State and local codes in some areas prohibit the use of vent free products.
PLEASE CHECK YOUR LOCAL BUILDING CODES BEFORE ORDERING OR INSTALLING A VENT FREE PRODUCT.