SunStar SC18T-1-NG 18000 BTU Thermostatic Vent Free Infrared/Radiant Heater - NG

Sku:
SUNSTAR-SC18T1NG
Usually Leaves Warehouse in 1 - 3 Business Days
$289.00
Installing a vent free gas heater is a safe and cost efficient way to heat a single room. The SC18T1NG uses Natural Gas (NG). It can be installed in a wall or an optional floor stand is available. It is a thermostat controlled heater with a Piezo ignition and standing pilot. The top mounted controls are easily accessible. Simply turn it on and the heat will begin warming your room immediately. Thermostatic heat control from low to high.
 
The 18,000 BTU heater includes ODS and flame failure safety features. No electricity is required to run this unit. It is a great heater to have in the event of a power failure because it will keep on heating! It is reliable and virtually 100% efficient - all the heat generated is emitted into your home.
 
The SunStar SC18T1NG is a slim, compact heater. It measures 25"H x 19.75"W x 9.5"D. Vent-free installation does not require an outside wall giving you more possibilities for installation. It can be as low on a wall as 2" from the floor or as high as 36" from the ceiling. Clearance on the sides is 13".
 
Installation in Mobile Homes as permitted by state and local codes.
 
Vent-Free Products Cannot Be Shipped To The State Of California. 
FREE SHIPPING ON ALL ORDERS!
SunStar SC18T-1-NG 18000 BTU Thermostatic Vent Free Infrared Heater - NG

Product Overview

Installing a vent free gas heater is a safe and cost efficient way to heat a single room. The SC18T1NG uses Natural Gas (NG). It can be installed in a wall or an optional floor stand is available. It is a thermostat controlled heater with a Piezo ignition and standing pilot. The top mounted controls are easily accessible. Simply turn it on and the heat will begin warming your room immediately. Thermostatic heat control from low to high.
 
The 18,000 BTU heater includes ODS and flame failure safety features. No electricity is required to run this unit. It is a great heater to have in the event of a power failure because it will keep on heating! It is reliable and virtually 100% efficient - all the heat generated is emitted into your home.
 
The SunStar SC18T1NG is a slim, compact heater. It measures 25"H x 19.75"W x 9.5"D. Vent-free installation does not require an outside wall giving you more possibilities for installation. It can be as low on a wall as 2" from the floor or as high as 36" from the ceiling. Clearance on the sides is 13".
 
Installation in Mobile Homes as permitted by state and local codes.
 
Vent-Free Products Cannot Be Shipped To The State Of California. 

Tech Specs

  • Heating BTUs:
    18000
  • Control Type:
    Thermostatic
  • Number of Control Settings:
    Thermostatic
  • Ignition Type:
    Standing Pilot
  • Blower:
    Optional
  • Floor Stand Kit:
    Included
  • Wall Mounting Kit:
    Included
  • Manifold Pressure (in.):
    10
  • Inlet Gas Pressure (Min.):
    11"
  • Inlet Gas Pressure (Max.):
    14"
  • Fuel Type:
    Liquid Propane (LP)
  • Flame Type:
    Infrared/Radiant
  • Width (in.):
    19.75
  • Depth (in.):
    9.5
  • Height (in.):
    25
  • Clearance to Side Wall (in.):
    13
  • Clearance Top to Ceiling (in.):
    36
  • Clearance Bottom to Floor:
    2
  • Net Weight (lbs.):
    24
  • Parts Warranty:
    5 Years
  • Labor Warranty:
    None
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov