SunStar SC10T-1-LP 8,500 BTU Thermostatic Vent Free Infrared/Radiant Heater - LP

Sku:
SUNSTAR-SC10T1LP
No Longer Available for 2023-2024 Season
$395.10
Installing a vent free gas heater is a safe and cost efficient way to heat a single room. The SC10T1LP runs on liquid propane (LP gas). It can be installed in a wall or an optional floor stand is available. It is a thermostat controlled heater with a Piezo ignition and standing pilot. The top mounted controls are easily accessible. Simply turn it on and the heat will begin warming your room immediately. Thermostatic heat control from low to high.
 
The 8,500 BTU heater includes ODS and flame failure safety features. No electricity is required to run this unit. It is a great heater to have in the event of a power failure because it will keep on heating! It is reliable and virtually 100% efficient - all the heat generated is emitted into your home.
 
The SunStar SC10T-1-LP is a slim, compact heater. It measures 20.875"H x 13"W x 5.375"D. Vent-free installation does not require an outside wall giving you more possibilities for installation. It can be as low on a wall as 2" from the floor or as high as 36" from the ceiling. Clearance on the sides is 13".
 
Installation in Mobile Homes as permitted by state and local codes. This 10000 BTU class heater is rated for bedroom installation where permitted by law.
 
Vent-Free Products Cannot Be Shipped To The State Of California. 
SunStar SC10T-1-LP 8,500 BTU Thermostatic Vent Free Infrared/Radiant Heater - LP
  • SunStar SC10T-1-LP 8,500 BTU Thermostatic Vent Free Infrared/Radiant Heater - LP
  • SunStar SC10T-1-LP 8,500 BTU Thermostatic Vent Free Infrared/Radiant Heater - LP

Product Overview

Installing a vent free gas heater is a safe and cost efficient way to heat a single room. The SC10T1LP runs on liquid propane (LP gas). It can be installed in a wall or an optional floor stand is available. It is a thermostat controlled heater with a Piezo ignition and standing pilot. The top mounted controls are easily accessible. Simply turn it on and the heat will begin warming your room immediately. Thermostatic heat control from low to high.
 
The 8,500 BTU heater includes ODS and flame failure safety features. No electricity is required to run this unit. It is a great heater to have in the event of a power failure because it will keep on heating! It is reliable and virtually 100% efficient - all the heat generated is emitted into your home.
 
The SunStar SC10T-1-LP is a slim, compact heater. It measures 20.875"H x 13"W x 5.375"D. Vent-free installation does not require an outside wall giving you more possibilities for installation. It can be as low on a wall as 2" from the floor or as high as 36" from the ceiling. Clearance on the sides is 13".
 
Installation in Mobile Homes as permitted by state and local codes. This 10000 BTU class heater is rated for bedroom installation where permitted by law.
 
Vent-Free Products Cannot Be Shipped To The State Of California. 

Tech Specs

General Features

Installation Type:
Floor or Wall Mount
Fuel Type:
Liquid Propane (LP)
Installation Kit:
Wall Mount Included, Floor Stand Kit Optional
Type of Venting:
Vent Free
Tilt Switch:
NA

System Data

Heating BTUs:
8500
CFMs:
NA
Blower:
Not Available
Flame Type:
Infrared / Radiant
Ignition Type:
Standing Pilot
Control Type:
Thermostatic

Gas Requirements

Gas Connection Size (in.):
1/2"
Manifold Pressure (in.):
10" w.c.
Inlet Gas Pressure (Min.):
11" w.c.
Inlet Gas Pressure (Max.):
14" w.c.

Clearances

Top to Ceiling (in.):
36"
Bottom to Floor (in.):
2"
To Side Wall (in.):
13"

Weights and Dimensions

Width (in.):
13
Depth (in.):
7.5
Height (in.):
20.875
Net Weight (lbs.):
12
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Product Warranty

5 Year Limited Warranty