RH Peterson Real-Fyre G31-24/30-02P 24" / 30" Three Tiered Vented Burner with Electronic Ignition and On/Off Remote - Liquid Propane

Sku:
RH-PETERSON-G31243002P
Special Order - No Cancellations - No Refunds - Estimated Lead Time 6 - 8 Weeks
$2,064.60
Burners are certified to work with SPECIFIC Log Sets only. While there may be several allowable Log Sets for a specific burner, they are NOT universal. Using a burner with a non-compatible log set can lead to Fire, Carbon Monoxide Poisoning and Property Damage.
The G31 burner is a Three Tiered Burner. The G31-24/3002 has an Electronic Valve with Intermittent Pilot and on/off Remote. The G31-24/30-02P burner is for use with Liquid Propane but it is also available for use with Natural Gas. One of the benefits of this burner are the beautiful, high, robust flames created, while using fewer BTUs than other vented burner systems. This burner should produce top flames that are approximately 3" - 5" above and between the logs with the center flame being the tallest. The middle flames should be at or below the top of the front log and the ember flames should be approximately 1/4" - 1" above the embers at the front of the burner.
 
The G31 Burner is for use in a wood burning fireplace equipped with a gas line. Minimum fireplace dimensions for using the G31-24/30 Burner with a 24" log set are:
  • 35" Front Width
  • 25" Rear Width
  • 15" Depth (The depth is measured from inside the lip.)
  • 17" Height
Minimum fireplace dimensions for using the G31-24/30 Burner with a 30" log set are:
  • 39" Front Width
  • 28" Rear Width
  • 15" Depth (The depth is measured from inside the lip.)
  • 17" Height
The G31-24/30 burner can be used with several 24" OR 30" gas log sets. Please confirm your fireplace dimensions before choosing the size log set for your use.
 
The G31-24/30 Burner (regardless of the valve and gas type chosen) can only be used with specific 24" or 30" gas logs. The burner was designed to work with:
  • Mountain Crest Oak (MCO24 or MCO30)
  • Mountain Crest Split Oak (MCS24 or MCS30)
  • Charred Angel Oak (CHNA24 or CHNA30)
  • Charred Angel Split Oak (CHNS24 or CHNS30)
Other log sets that are compatible with the G31 burner include:
  • Charred Oak (CHD24 or CHD30)
  • Charred American Oak (CHAO24 or CHAO30)
  • Charred Royal English Oak (CHB24 or CHB30)
  • Charred Split (CHS24 or CHS30)
The G31 Burner system includes:
  • Burner pan with integrated grate
  • Vermiculite
  • Glowing embers
  • Lava Fyre Coals
  • Lava Granules
  • Glowing Embers
  • Bryte Coals
  • Flex connector kit
  • Damper clamp
  • Remote Kit including receiver, transmitter, batteries
  • Decorative heat shield
Log set is sold separately.
FREE SHIPPING ON ALL ORDERS!
RH Peterson Real-Fyre G31-24/30-02P 24" / 30" Three Tiered Vented Burner with Electronic Ignition and On/Off Remote - Liquid Propane

Product Overview

Burners are certified to work with SPECIFIC Log Sets only. While there may be several allowable Log Sets for a specific burner, they are NOT universal. Using a burner with a non-compatible log set can lead to Fire, Carbon Monoxide Poisoning and Property Damage.
The G31 burner is a Three Tiered Burner. The G31-24/3002 has an Electronic Valve with Intermittent Pilot and on/off Remote. The G31-24/30-02P burner is for use with Liquid Propane but it is also available for use with Natural Gas. One of the benefits of this burner are the beautiful, high, robust flames created, while using fewer BTUs than other vented burner systems. This burner should produce top flames that are approximately 3" - 5" above and between the logs with the center flame being the tallest. The middle flames should be at or below the top of the front log and the ember flames should be approximately 1/4" - 1" above the embers at the front of the burner.
 
The G31 Burner is for use in a wood burning fireplace equipped with a gas line. Minimum fireplace dimensions for using the G31-24/30 Burner with a 24" log set are:
  • 35" Front Width
  • 25" Rear Width
  • 15" Depth (The depth is measured from inside the lip.)
  • 17" Height
Minimum fireplace dimensions for using the G31-24/30 Burner with a 30" log set are:
  • 39" Front Width
  • 28" Rear Width
  • 15" Depth (The depth is measured from inside the lip.)
  • 17" Height
The G31-24/30 burner can be used with several 24" OR 30" gas log sets. Please confirm your fireplace dimensions before choosing the size log set for your use.
 
The G31-24/30 Burner (regardless of the valve and gas type chosen) can only be used with specific 24" or 30" gas logs. The burner was designed to work with:
  • Mountain Crest Oak (MCO24 or MCO30)
  • Mountain Crest Split Oak (MCS24 or MCS30)
  • Charred Angel Oak (CHNA24 or CHNA30)
  • Charred Angel Split Oak (CHNS24 or CHNS30)
Other log sets that are compatible with the G31 burner include:
  • Charred Oak (CHD24 or CHD30)
  • Charred American Oak (CHAO24 or CHAO30)
  • Charred Royal English Oak (CHB24 or CHB30)
  • Charred Split (CHS24 or CHS30)
The G31 Burner system includes:
  • Burner pan with integrated grate
  • Vermiculite
  • Glowing embers
  • Lava Fyre Coals
  • Lava Granules
  • Glowing Embers
  • Bryte Coals
  • Flex connector kit
  • Damper clamp
  • Remote Kit including receiver, transmitter, batteries
  • Decorative heat shield
Log set is sold separately.

Tech Specs

General Features

Fireplace Style:
Single Sided
Location of Use:
Indoor
Type of Venting:
Vented
Media Style:
Traditional Log Set
Type of Grate:
Standard
Fuel Type:
Liquid Propane (LP)
Allowable Log Set Sizes (in.):
24" / 30"
Allowable Log Sets:
Charred Series
Certified Usage:
Mobile Home Approved

Performance

BTUs (Max.):
50000
Ignition Type:
Electronic Ignition
Remote:
Included

Gas Requirements

Gas Connection Size (in.):
1/2"
Manifold Pressure (in.):
NA
Inlet Gas Pressure (Min.):
11.0" w.c.
Inlet Gas Pressure (Max.):
13.0" w.c.

Minimum Firebox Requirements

Requirements for 24" or 30" Logs

Req. Min. Front Width (in.) - 24":
34"
Req. Min. Front Width (in.) - 30":
36"
Req. Min. Rear Width (in.) - 24":
25"
Req. Min. Rear Width (in.) - 30":
27"
Req. Min. Depth (in.):
15"
Req. Min. Height (in.):
17"
Chimney Height (Min. ft.):
15'
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov