Product Overview
Line sets are required when installing a Mr. Cool DIY system. They connect the outdoor compressor or condenser to the indoor air handler. Mr. Cool offers a unique solution for their DIY Heat and Cool Indoor and Outdoor Systems. The Mr. Cool DIY Quick Connect Line Set is pre-charged with R454B refrigerant. The line uses Quick Connect Fittings which are specially designed for use when installing the Mr. Cool DIY Single Zone Split Systems. No-Vac lines simply plug into the Condenser and the Indoor Wall Air Handler. No cutting, no brazing, no vacuuming, no charging!
This line set has a 1/4" liquid line, 1/2" suction line and is 25' long. Included with the 25 foot line set is 25 feet of Pro Cable. It can be used with the DIY 9,000, 12,000 and 18,000 BTU Indoor Units. It can also be used to extend the line set length included with the 9,000, 12,000 and 18,000 BTU DIY Single Zone Systems. The line set is encased in a strong, 3/4" UV Protective Insulation Sleeve. It will prevent sun damage, weather erosion and destruction from wildlife. The No-Vac Line Set is kink resistant and easy to bend during installation.
Mr. Cool Quick Connect Line Sets are required for Mr. Cool DIY Systems ONLY. The DIY25-1412-O is for use with the 9,000, 12,000 and 18,000 BTU Indoor Wall Units only. Lines can be combined with a Mr. Cool DIY Coupler for longer lengths.
This line set is for use with the 9,000, 12,000 and 18,000 DIY Indoor Units. Pro Cable is included with this line set.
Mr.Cool Single Zone systems also include the option of extending the 25' line set. With the appropriately sized DIY coupler, the line set can be extended up to a total of 75 ft by adding additional line sets and couplers. The DIY25-1412C-O can be used to extend line set length to install the DIY Systems. Couplers are required but not included.
Tech Specs
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
