Product Overview
The ICM518 Split Phase Surge Protector is made to protect electronic equipment from unwanted power surges. It is UL Listed (US and Canada) as a Type 1 & 2 Surge Protective Device for 240 VAC Split Phase voltage configurations. This product is housed in a NEMA Type 4X watertight enclosure which is for use in both indoor and outdoor applications. It has a Short Circuit Current Rating (SCCR) of 200,000 Amps. The ICM518 utilizes thermal protection on the surge elements (TMOV’s) which allows for the safe disabling of the elements when a surge exceeds the thermal limits of the device.
UL Listed - Type 1 Surge Protective Device (SPD):
- Intended for installation on either the lineside or loadside of the service. The ICM518 is dual-rated for both Type 1 and Type 2 applications.
UL Listed - Type 2 Surge Protective Device (SPD):
- Intended to be installed on the loadside of the service at the loadside of A/C disconnect or an indoor electrical panel when protected by a circuit breaker of 20-60A max and 240V. For a strictly Type 2 Device, please see the ICM517 here.
The ICM518 has a status light on the control which identifies operational status when illuminated. It is rated and suitable for use on a circuit capable of delivering not more than 200kA RMS symmetrical amperes, 240V maximum. It is recommended that a licensed electrician install the ICM518.
Features:
- 240 VAC split surge protective device
- Easy 3-wire installation
- 3/4” conduit connection
- Green LED indicator tells whether the device is operational
- Low cost, high performance
- Rugged and reliable
- UL Listed Type 1 or Type 2 SPD
- NEMA Type 4X watertight enclosure for indoor/outdoor use
- Surge protection technology: Thermally protected MOVs (TFMOV)
Its dimensions are 4.3" x 4.1" x 2.3".
The ICM518 is proudly manufactured in the USA.
Tech Specs
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
