Empire Comfort Systems DV-210-SGX 10,000 BTU Direct-Vent Wall Furnace

Sku:
EMPIRE-DV210SGX
Usually Leaves Warehouse in 2 - 3 Business Days
$1,209.00
With Empire's DV210 direct-vent wall furnace you get a clean, convenient way to add heat in a cost-efficient manner! The slim, compact design allows it to be installed, out of the way on any outside wall. A vent goes through the wall and out. There is no need for a chimney or flue - just a gas line. The Empire DV-210-SGX does not use electricity and is ideal for bedrooms or dens since it vents directly to the outside. At 10000 BTUs, it is a perfect size for smaller rooms. The neutral beige-colored cabinetry will blend into any room and add endless comfort. Plus it is not sitting in the middle of the floor and there are no wires to trip over!
 
With a direct-vent heating product, economy is increased by using outside air to support combustion. Inside air is warmed as it re-circulates around a sealed combustion chamber, and this warm air heats the room and reduces drafts. Empire Comfort Systems' Direct-Vent units are ideal where existing flues or chimneys cannot be used.
 
The DV210SGX is a standing pilot furnace. It does not include a thermostat. A wireless Remote Wall Thermostat (TRW) and a Wall Thermostat Millivolt Reed Switch (TMV) are both available separately.
  • Will work in the event of a power outage (if a blower is installed, the blower will not function)
  • Total warmth for a fraction of the cost of electric heat
  • Optional automatic blower available (DVB-1 - requires electricity) (Sold Separately)
  • Cost-efficient installation -- no chimney needed
  • Includes standard vent cap, flue outlet and air intake for venting
  • 64 - 69% AFUE Efficiency Rating
This item is available in both Liquid Propane (DV-210-SGX-LP) and Natural Gas (DV-210-SGX-NAT)
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
 
This item replaces the DV210SG
FREE SHIPPING ON ALL ORDERS!
Empire Comfort Systems DV-210-SGX 10,000 BTU Direct-Vent Wall Furnace
  • Empire Comfort Systems DV-210-SGX 10,000 BTU Direct-Vent Wall Furnace
  • Empire Comfort Systems DV-210-SGX 10,000 BTU Direct-Vent Wall Furnace
  • Empire Comfort Systems DV-210-SGX 10,000 BTU Direct-Vent Wall Furnace

Product Overview

With Empire's DV210 direct-vent wall furnace you get a clean, convenient way to add heat in a cost-efficient manner! The slim, compact design allows it to be installed, out of the way on any outside wall. A vent goes through the wall and out. There is no need for a chimney or flue - just a gas line. The Empire DV-210-SGX does not use electricity and is ideal for bedrooms or dens since it vents directly to the outside. At 10000 BTUs, it is a perfect size for smaller rooms. The neutral beige-colored cabinetry will blend into any room and add endless comfort. Plus it is not sitting in the middle of the floor and there are no wires to trip over!
 
With a direct-vent heating product, economy is increased by using outside air to support combustion. Inside air is warmed as it re-circulates around a sealed combustion chamber, and this warm air heats the room and reduces drafts. Empire Comfort Systems' Direct-Vent units are ideal where existing flues or chimneys cannot be used.
 
The DV210SGX is a standing pilot furnace. It does not include a thermostat. A wireless Remote Wall Thermostat (TRW) and a Wall Thermostat Millivolt Reed Switch (TMV) are both available separately.
  • Will work in the event of a power outage (if a blower is installed, the blower will not function)
  • Total warmth for a fraction of the cost of electric heat
  • Optional automatic blower available (DVB-1 - requires electricity) (Sold Separately)
  • Cost-efficient installation -- no chimney needed
  • Includes standard vent cap, flue outlet and air intake for venting
  • 64 - 69% AFUE Efficiency Rating
This item is available in both Liquid Propane (DV-210-SGX-LP) and Natural Gas (DV-210-SGX-NAT)
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
 
This item replaces the DV210SG

Tech Specs

General Features

Installation Type:
Wall Mount
Fuel Type:
Choice NG / LP
Installation Kit:
Vent Kit Included
Tilt Switch:
NA

Performance Data

Heating BTUs:
10000
Heating BTUs (Output):
NA

Venting

Type of Venting:
Direct Vent
Air Inlet Tube (in.):
5"
Flue Outlet Tube (in.):
3"

System Data

Flame Type:
NA
Blower:
Optional
Ignition Type:
Standing Pilot
Control Type:
Wall Thermostat Required (NOT INCLUDED)

Gas Requirements

Gas Connection Size:
1/2"
Manifold Pressure (in.):
4.0" w.c. (NG) / 10.0" w.c. (LP)
Inlet Gas Pressure (Min.):
5.0" w.c. (NG) / 11.0" w.c. (LP)
Inlet Gas Pressure (Max.):
10.5" w.c. (NG) / 13.0" w.c. (LP)

Clearances

Top to Ceiling (in.):
12
Bottom to Floor (in.):
0
To Side Wall (in.):
1

Weights and Dimensions

Width (in.):
16.25
Depth (in.):
9.375
Height (in.):
21.375
Net Weight (lbs.):
42
Certifications:
CSA
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov