Empire Comfort Systems BF-30W 30,000 BTU Blue Flame Vent-Free Gas Heater with Thermostat

Sku:
EMPIRE-BF30W
Usually Leaves Warehouse in 2 - 3 Business Days
$809.00
The BF30W produces an inviting warmth quickly and efficiently. A Blue Flame heater will warm the room starting with objects in the room including the wall on which it is installed and travel up as heat does. If your room has a ceiling fan with reversible blades, this will also help spread the heat throughout the room.
 
The BF-30 is equipped with a hydraulic thermostat and modulates from 8,500 BTUs to 30,000 BTUs for continuous temperature control. With a modulating hydraulic thermostat once the preset comfort level is reached, the unit cycles the main burner flame from HI to LO and, when the thermostat is satisfied, to OFF while still leaving the pilot on. This reduces the large flame to a smaller flame while still emitting heat. This vent free heater should not be used as a primary heat source.
 
Although gas heats cleanly, efficiently, and for less than half the cost of electricity, if window condensation problems are common in your home, installing a vent-free heater may not be a good option for you. This appliance may be installed in an aftermarket manufactured (mobile) home, where allowed by state or local codes.
  • Convenient, easy-to-use controls on the top of the unit
  • Push-button start (no need for matches)
  • Test-fired in the factory
  • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
  • Quiet
  • New updated White Finish
  • Durable, scratch-resistant finish
  • Gas heat also continues to function in the event of a power outage.
  • 99.9% AFUE Efficiency Rating
Available in Natural Gas BF-30WN and Liquid Propane BF30WL
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
 
PHOTO SHOWS HEATER MOUNTED ON OPTIONAL FLOOR STAND.
 
Vent-Free Products Cannot Be Shipped To The State Of California.
FREE SHIPPING ON ALL ORDERS!
Empire Comfort Systems BF-30W 30,000 BTU Blue Flame Vent-Free Gas Heater
  • Empire Comfort Systems BF-30W 30,000 BTU Blue Flame Vent-Free Gas Heater
  • Empire Comfort Systems BF-30W 30,000 BTU Blue Flame Vent-Free Gas Heater

Product Overview

The BF30W produces an inviting warmth quickly and efficiently. A Blue Flame heater will warm the room starting with objects in the room including the wall on which it is installed and travel up as heat does. If your room has a ceiling fan with reversible blades, this will also help spread the heat throughout the room.
 
The BF-30 is equipped with a hydraulic thermostat and modulates from 8,500 BTUs to 30,000 BTUs for continuous temperature control. With a modulating hydraulic thermostat once the preset comfort level is reached, the unit cycles the main burner flame from HI to LO and, when the thermostat is satisfied, to OFF while still leaving the pilot on. This reduces the large flame to a smaller flame while still emitting heat. This vent free heater should not be used as a primary heat source.
 
Although gas heats cleanly, efficiently, and for less than half the cost of electricity, if window condensation problems are common in your home, installing a vent-free heater may not be a good option for you. This appliance may be installed in an aftermarket manufactured (mobile) home, where allowed by state or local codes.
  • Convenient, easy-to-use controls on the top of the unit
  • Push-button start (no need for matches)
  • Test-fired in the factory
  • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
  • Quiet
  • New updated White Finish
  • Durable, scratch-resistant finish
  • Gas heat also continues to function in the event of a power outage.
  • 99.9% AFUE Efficiency Rating
Available in Natural Gas BF-30WN and Liquid Propane BF30WL
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
 
PHOTO SHOWS HEATER MOUNTED ON OPTIONAL FLOOR STAND.
 
Vent-Free Products Cannot Be Shipped To The State Of California.

Tech Specs

General Features

Installation Type:
Floor or Wall Mount
Fuel Type:
Choice NG / LP
Installation Kit:
Wall and Floor Stand Kits Included
Type of Venting:
Vent Free
Tilt Switch:
NA

System Data

Heating BTUs:
30000
CFMs:
NA
Blower:
Optional
Flame Type:
Blue Flame
Ignition Type:
Standing Pilot
Control Type:
Thermostatic

Gas Requirements

Gas Connection Size:
3/8"
Manifold Pressure (in.):
3.5" w.c. (NG) / 10.0" w.c. (LP)
Inlet Gas Pressure (Min.):
5.0" w.c. (NG) / 11.0" w.c. (LP)
Inlet Gas Pressure (Max.):
10.5" w.c. (NG) / 13.0" w.c. (LP)

Clearances

Top to Ceiling (in.):
36
Bottom to Floor (in.):
2
To Side Wall (in.):
5

Weights and Dimensions

Width (in.):
24.125
Depth (in.):
6.5
Height (in.):
22
Net Weight (lbs.):
38
Certifications:
AHRI, Design Certified

Electrical Requirements

Voltage:
110-120V
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov