White Mountain Hearth Birch Log Set - Choice of Vent Free Burner

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
EMPIRE-BIRCH-VF

White Mountain Hearth Birch Ceramic Fiber Log Set offers a dramatic focal point in a vent-free firebox or a gas equipped fireplace. The light coloring of the Birch tree bark is captured in this hand-crafted, log set. The log set includes unsplit sections of birch logs, exposing the insides of the trunks as well as showcasing the different textures of the bark. This 4-piece log set stacks impressively on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch firebox without getting lost. 

With internal ceramic beads forcing the gas to move around inside the burner tubes, the Empire Slope Glaze Burners create a more representative flame pattern, complete with dancing flames through and around the log stack. Because a Slope Glaze Burner is lower in the front and a bit higher in the back, your logs will stack nicely. Vent-free gas logs generate consistent, controlled heat, without the mess, flare-ups and die-downs of a wood-burning fire. Forget chopping, stacking and lugging wood, with a gas fire log set you get the look without the hassle!

Birch Logs are available in 18" (LS18-B2), 24" (LS24-B2) and 30" (LS30-B2) sizes. To correspond to your log set size, White Mountain Hearth's Slope Glaze Burners are available in 18", 24" and 30" sizes with several valve options to help meet your needs:

  • VFSM - Manual (No Remote Available) - operates manually with Off/Pilot/3 position heat setting knob; Cannot be used with wall thermostat or remotes
  • VFSR - Millivolt (Remote Available, Not Included) - Standing Pilot, On/Off Remote Ready, Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats - sold separately)
  • VFSV - Variable Flame, Height Control (Includes Remote) - Standing pilot with four level flame height control.
  • VFSE - Intermittent Pilot (Programmable Remote Included) - Electronic Ignition with Remote Thermostat and Variable Flame Height Control

Both the VFSM (Manual) and VFSV (Variable) models are certified for installation in a vented fireplace. When installed in a vented application, each can only be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A Damper Clamp is included for this purpose.

Your complete set will include the Birch Logs and Burner/Grate Assembly (size, fuel type and valve chosen), Decorative Rocks, Glowing Embers (rock wool) for burner coverage, Valve Shield (VFSM model) and installation screws and damper clamp. The VFSV and VFSE models will include the Remote Kit.

 

A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

  
  BTUs (Min./Max.) Req. Min. Rear Width (in.) (A) Req. Min. Depth (in.) (B) Req. Min. Front Width (in.) (C) Req. Min. Height (in.) (D)
18" Slope Glaze Burners          
VFSM - Manual Valve 22,000 / 32,000 BTUs 21 14 32 17
VFSR- Millivolt Valve 22,000 / 32,000 BTUs


17



14



28



17
VFSV- Variable Flame Height 21,000 / 32,000 BTUs
VFSE- Intermittent Pilot 26,000 / 32,000 BTUs
24" Slope Glaze Burners          
VFSM - Manual Valve 22,000 / 36,000 BTUs 27 14 34 18
VFSR- Millivolt Valve 25,000 / 36,000 BTUs


23



14



30



18
VFSV- Variable Flame Height 24,000 / 36,000 BTUs
VFSE- Intermittent Pilot 28,800 / 36,000 BTUs
30" Slope Glaze Burners          
VFSM - Manual Valve 22,000 / 38,000 BTUs 30 14 38 20
VFSR- Millivolt Valve 26,000 / 38,000 BTUs


26



14



34



20
VFSV- Variable Flame Height 27,000 / 38,000 BTUs
VFSE- Intermittent Pilot 30,000 / 38,000 BTUs
$614.70
White Mountain Hearth Birch Log Set - Choice of Vent Free Burner
  • White Mountain Hearth Birch Log Set - Choice of Vent Free Burner
  • has video
Customer Reviews
FREE SHIPPING ON ALL ORDERS!

White Mountain Hearth Birch Ceramic Fiber Log Set offers a dramatic focal point in a vent-free firebox or a gas equipped fireplace. The light coloring of the Birch tree bark is captured in this hand-crafted, log set. The log set includes unsplit sections of birch logs, exposing the insides of the trunks as well as showcasing the different textures of the bark. This 4-piece log set stacks impressively on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch firebox without getting lost. 

With internal ceramic beads forcing the gas to move around inside the burner tubes, the Empire Slope Glaze Burners create a more representative flame pattern, complete with dancing flames through and around the log stack. Because a Slope Glaze Burner is lower in the front and a bit higher in the back, your logs will stack nicely. Vent-free gas logs generate consistent, controlled heat, without the mess, flare-ups and die-downs of a wood-burning fire. Forget chopping, stacking and lugging wood, with a gas fire log set you get the look without the hassle!

Birch Logs are available in 18" (LS18-B2), 24" (LS24-B2) and 30" (LS30-B2) sizes. To correspond to your log set size, White Mountain Hearth's Slope Glaze Burners are available in 18", 24" and 30" sizes with several valve options to help meet your needs:

  • VFSM - Manual (No Remote Available) - operates manually with Off/Pilot/3 position heat setting knob; Cannot be used with wall thermostat or remotes
  • VFSR - Millivolt (Remote Available, Not Included) - Standing Pilot, On/Off Remote Ready, Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats - sold separately)
  • VFSV - Variable Flame, Height Control (Includes Remote) - Standing pilot with four level flame height control.
  • VFSE - Intermittent Pilot (Programmable Remote Included) - Electronic Ignition with Remote Thermostat and Variable Flame Height Control

Both the VFSM (Manual) and VFSV (Variable) models are certified for installation in a vented fireplace. When installed in a vented application, each can only be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A Damper Clamp is included for this purpose.

Your complete set will include the Birch Logs and Burner/Grate Assembly (size, fuel type and valve chosen), Decorative Rocks, Glowing Embers (rock wool) for burner coverage, Valve Shield (VFSM model) and installation screws and damper clamp. The VFSV and VFSE models will include the Remote Kit.

 

A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.

  
  BTUs (Min./Max.) Req. Min. Rear Width (in.) (A) Req. Min. Depth (in.) (B) Req. Min. Front Width (in.) (C) Req. Min. Height (in.) (D)
18" Slope Glaze Burners          
VFSM - Manual Valve 22,000 / 32,000 BTUs 21 14 32 17
VFSR- Millivolt Valve 22,000 / 32,000 BTUs


17



14



28



17
VFSV- Variable Flame Height 21,000 / 32,000 BTUs
VFSE- Intermittent Pilot 26,000 / 32,000 BTUs
24" Slope Glaze Burners          
VFSM - Manual Valve 22,000 / 36,000 BTUs 27 14 34 18
VFSR- Millivolt Valve 25,000 / 36,000 BTUs


23



14



30



18
VFSV- Variable Flame Height 24,000 / 36,000 BTUs
VFSE- Intermittent Pilot 28,800 / 36,000 BTUs
30" Slope Glaze Burners          
VFSM - Manual Valve 22,000 / 38,000 BTUs 30 14 38 20
VFSR- Millivolt Valve 26,000 / 38,000 BTUs


26



14



34



20
VFSV- Variable Flame Height 27,000 / 38,000 BTUs
VFSE- Intermittent Pilot 30,000 / 38,000 BTUs
  • Type of Venting:
    Vent Free
  • Fireplace Style:
    Single Sided
  • Log Style:
    Birch
  • Size of Log Set (in.):
    18
  • Size of Log Set (in.):
    24
  • Size of Log Set (in.):
    30
Limited 5 Year Parts and Labor Warranty (Except Remote Controls, Thermostats, Accessories and Replacement Parts)