A direct-vent fireplace is a sealed fireplace system. It is installed into a wall and offers maximum installation flexibility with combination top or rear venting. This Superior Pro Series comes complete with an Charred Oak Log Set, decorative grate and glowing embers and volcanic stones for a fabulously realistic-looking fire. This fireplace also features six setting interior lighting and includes a full function remote (thermostat, flame, blower, lighting and IPI/CPI) and an energy saving intermittent pilot ignition with standard high/low flame control. The fireplace is concealed and features standard ceramic glass with barrier screen that meets 2015 requirements. It boasts a clean, full view face with a heat-circulating design.
A liner is required but not included. There are four liner options available (sold separately).
Because it is a gas direct vent fireplace, it will operate during a power outage. However, the blower will not operate. The blower included with this fireplace is a variable speed blower. It includes an SIT Proflame II Control System with battery backup. Standard IPI/CPI switch for easier operation during severe temperatures.
This fireplace uses 4.5"/7.5" Secure Vent Rigid and Flex Direct Vent Components. A termination kit is required to finish off the outside of your system.
This fireplace system has a BTU Input Max. Rating of 26,000 BTUs and 17,000 BTUs Min. and a 68.5% AFUE rating.
Gas Pressure Requirements:
- Inlet Gas Supply Pressure: 5.0" WC (Min.); 10.5" WC (Max.)
- Manifold Gas Supply Pressure: 3.5" WC
- 3/8" NPT Threads
This direct vent fireplace is a combination top/rear vent unit for installation flexibility and is for use with natural gas. It is also available for use with liquid propane - DRT3535DEP-C
Professional installation by a certified gas technician is required.