Sauermann SI30-230 Mini Condensate Removal Pump - 230 Volt

Sku:
SAUERMANN-SI30230
Usually Leaves Warehouse in 2 - 3 Business Days
$149.00
A condensate removal pump is used when gravity cannot route the condensation build-up from your air conditioner properly. The condensation is collected in the pump and routed through a tube to the drainage point, whether it is a sewer, a floor drain, a window or even through the wall and outside.

The high performance Si-30 is suitable for air-conditioning units up to 5.6 tons (67 kBtu - 20 kW). The piston technology is specifically designed for removing condensates from air conditioning systems. The Si-30 is fully reliable, in any kind of environment. Its operating sound level will remain silent whatever the volume of condensates. It also boasts a low noise level (20 dBA) and small size with a low maintenance filter-free detection system.

 

This mini pump can be used with air conditioners up to 5.6 tons (67 kBTU - 20 kW), wall split systems, consoles, fan coils, ceiling suspended units and ducted units.

  • High resistance to pollution created by general environment. Capable of discharging small particles
  • Proven reliability
  • Silent 
  • Quiet in operation: 20 dBA independently tested.
  • The size of the air-conditioning unit and volume of condensates to be removed does not affect the operational sound level of the pump.
  • Easy to install
    • New mounting bracket specifically designed to reduce vibration transmission to the wall / panel or pipework
    • Compact design
    • New mounting bracket: allows the pump to be wall mounted or hung from ceilings and pipework
    • Plug-in power cord to make maintenance and replacement hassle free
  • Energy saving
    • Improved performance and high flow rate reduce operation time and energy
  • Kit Includes:
    • Piston pump
    • Anti-vibration mounting bracket
    • Plug in power cable with 2 safety switch wires (5ft - 1,5 m)
    • 6 tie wraps, 1/10" x 4" (2.5 x 100mm)
    • Detection unit SI2958, with (5 ft - 1.5m) cable
    • Detection unit installation kit: rubber elbow 90° Øint. 19/32" x 2"3/8 (Øint. 15 x L 60mm), Vent tube Øint. 5/32" x L 2"15/16 (Øint. 4 x L 75 mm), mounting rail, adhesive
  • TECHNICAL SPECIFICATIONS
    • Max. flow rate: 5.0 gph (19 l/h)
    • Max. suction head: 10 ft (3 m)
    • Max. discharge head (Vertical Pumping): 33ft (10 m); flow rate= 1gph (4l/h)
    • Max pressure: 46 ft (14 m); flow rate = 0 gph (0l/h)
    • Sound level at 1m according to EN ISO 3744 (Measured at LNE lab, pump operating with water, out of application): 20 dBA
    • Sound level in application at 1m (Measured in Sauermann acoustic lab, pump operating with water): ≤ 27 dBA
    • Mains supply: 120V ~ 60 Hz - 14 W (SI3000SIUS11) 230 V ~ 50/60 Hz - 14 W (SI3000SIUS23)
    • Insulation class (double insulation)
    • Detection levels On=5/8” Off=7/16’’ Alarm=3/4’’ (ON: 16mm, OFF: 11mm, AL: 19mm)
    • Safety switch NC 8A resistive - 250 V
    • Thermal protection (overheating) 194°F (90°C) auto-reset
    • Intermittent operation cycle 30%: 3s ON – 7s OFF
    • Protection: IP20
    • Safety standards: UL/CSA certified by Intertek
    • RoHS directive Compliant
    • DEEE directive Compliant
  • Dimensions:
    • Pump Unit: 2 5/8"L x 1 3/4" W x 2 3/8"H
    • Detection Unit: 2 1/4"L x 1 1/2"W x 1` 1/2"H
 
FREE SHIPPING ON ALL ORDERS!
Sauermann SI30-230 Mini Condensate Removal Pump - 230 Volt

Product Overview

A condensate removal pump is used when gravity cannot route the condensation build-up from your air conditioner properly. The condensation is collected in the pump and routed through a tube to the drainage point, whether it is a sewer, a floor drain, a window or even through the wall and outside.

The high performance Si-30 is suitable for air-conditioning units up to 5.6 tons (67 kBtu - 20 kW). The piston technology is specifically designed for removing condensates from air conditioning systems. The Si-30 is fully reliable, in any kind of environment. Its operating sound level will remain silent whatever the volume of condensates. It also boasts a low noise level (20 dBA) and small size with a low maintenance filter-free detection system.

 

This mini pump can be used with air conditioners up to 5.6 tons (67 kBTU - 20 kW), wall split systems, consoles, fan coils, ceiling suspended units and ducted units.

  • High resistance to pollution created by general environment. Capable of discharging small particles
  • Proven reliability
  • Silent 
  • Quiet in operation: 20 dBA independently tested.
  • The size of the air-conditioning unit and volume of condensates to be removed does not affect the operational sound level of the pump.
  • Easy to install
    • New mounting bracket specifically designed to reduce vibration transmission to the wall / panel or pipework
    • Compact design
    • New mounting bracket: allows the pump to be wall mounted or hung from ceilings and pipework
    • Plug-in power cord to make maintenance and replacement hassle free
  • Energy saving
    • Improved performance and high flow rate reduce operation time and energy
  • Kit Includes:
    • Piston pump
    • Anti-vibration mounting bracket
    • Plug in power cable with 2 safety switch wires (5ft - 1,5 m)
    • 6 tie wraps, 1/10" x 4" (2.5 x 100mm)
    • Detection unit SI2958, with (5 ft - 1.5m) cable
    • Detection unit installation kit: rubber elbow 90° Øint. 19/32" x 2"3/8 (Øint. 15 x L 60mm), Vent tube Øint. 5/32" x L 2"15/16 (Øint. 4 x L 75 mm), mounting rail, adhesive
  • TECHNICAL SPECIFICATIONS
    • Max. flow rate: 5.0 gph (19 l/h)
    • Max. suction head: 10 ft (3 m)
    • Max. discharge head (Vertical Pumping): 33ft (10 m); flow rate= 1gph (4l/h)
    • Max pressure: 46 ft (14 m); flow rate = 0 gph (0l/h)
    • Sound level at 1m according to EN ISO 3744 (Measured at LNE lab, pump operating with water, out of application): 20 dBA
    • Sound level in application at 1m (Measured in Sauermann acoustic lab, pump operating with water): ≤ 27 dBA
    • Mains supply: 120V ~ 60 Hz - 14 W (SI3000SIUS11) 230 V ~ 50/60 Hz - 14 W (SI3000SIUS23)
    • Insulation class (double insulation)
    • Detection levels On=5/8” Off=7/16’’ Alarm=3/4’’ (ON: 16mm, OFF: 11mm, AL: 19mm)
    • Safety switch NC 8A resistive - 250 V
    • Thermal protection (overheating) 194°F (90°C) auto-reset
    • Intermittent operation cycle 30%: 3s ON – 7s OFF
    • Protection: IP20
    • Safety standards: UL/CSA certified by Intertek
    • RoHS directive Compliant
    • DEEE directive Compliant
  • Dimensions:
    • Pump Unit: 2 5/8"L x 1 3/4" W x 2 3/8"H
    • Detection Unit: 2 1/4"L x 1 1/2"W x 1` 1/2"H