The wireless keypad control system offers the convenience of remote control operation of your Rinnai Single Stage SE and SE+ Patio Heaters. The Wireless Keypad works in tandem with the 903000031 4-button transmitter and the 903000030 remote receiver (sold separately). Each heater you have installed requires its own receiver, while a transmitter, such as the 4-button handset, can control up to 4 units or heaters in up to 4 zones. A receiver and handset are required for keypad programming and operation. A hand held 4-button transmitter (903000031) is required for master programming* of receiver or keypad (903000032).
The wireless keypad control system can be programmed to control up to 3 heating zones each with its own unique PIN for each zone. It features a weather resistant deign with a flip-up cover and can be installed on an exterior wall for ease of access for heater control in your establishment.
Multiple receivers can be programmed to one transmitter channel and multiple heaters can be activated in a single zone with one button. If more than 4 zones are required in your installation, then you will require more than one master transmitter. For example, two master handsets can control up to 8 zones. A Handset Transmitter is the "MASTER CONTROL" in the remote system. Transmitters are sold separately, each with random codes assigned for each button or zone. A Remote Control Keypad Transmitter (903000032) is also available for addition heater control.
*It is recommended to have a back-up transmitter in case the original is lost or misplaced. If a master transmitter is lost, any back-up transmitter can have the random codes changed for each button and then heater receivers can be re-programmed.