RH Peterson Real-Fyre G31-18/20AP 18" / 20" Three Tiered Vented Burner with Manual Valve and Standing Pilot - Liquid Propane

Sku:
RH-PETERSON-G311820AP
Special Order - No Cancellations - No Refunds - Estimated Lead Time 6 - 8 Weeks
$1,437.30
Burners are certified to work with SPECIFIC Log Sets only. While there may be several allowable Log Sets for a specific burner, they are NOT universal. Using a burner with a non-compatible log set can lead to Fire, Carbon Monoxide Poisoning and Property Damage.
The G31 burner is a Three Tiered Burner. The G31-18/20A has a manual burner and standing pilot. The G31-18/20-AP burner is for use with Liquid Propane but it is also available for use with Natural Gas. It is available for use with Natural Gas or Liquid Propane. This burner is for use with LP gas. One of the benefits of this burner are the beautiful, high, robust flames created, while using fewer BTUs than other vented burner systems. This burner should produce top flames that are approximately 3" - 5" above and between the logs with the center flame being the tallest. The middle flames should be at or below the top of the front log and the ember flames should be approximately 1/4" - 1" above the embers at the front of the burner.
 
This burner CANNOT be used with a remote control or wall switch. The G31 Burner is for use in a wood burning fireplace equipped with a gas line. Minimum fireplace dimensions for using the G31-18/20 Burner are:
  • 25" Front Width
  • 20" Rear Width
  • 15" Depth (The depth is measured from inside the lip.)
  • 17" Height
The G31 Burner (regardless of the valve and gas type chosen) can only be used with specific 18" gas logs. The burner was designed to work with:
  • Mountain Crest Oak (MCO18)
  • Mountain Crest Split Oak (MCS18)
  • Charred Angel Oak (CHNA18)
  • Charred Angel Split Oak (CHNS18)
Other log sets that are compatible with the G31 burner include:
  • Charred Oak (CHD18/20)
  • Charred American Oak (CHAO18/20)
  • Charred Royal English Oak (CHB18/20)
  • Charred Split (CHS18/20)
The G31 Burner system includes:
  • Burner pan with integrated grate
  • Vermiculite
  • Glowing embers
  • Lava Fyre Coals
  • Lava Granules
  • Glowing Embers
  • Bryte Coals
  • Flex connector kit
  • Damper clamp
Log set is sold separately.
FREE SHIPPING ON ALL ORDERS!
RH Peterson Real-Fyre G31-18/20AP 18" / 20" Three Tiered Vented Burner with Manual Valve and Standing Pilot - Liquid Propane

Product Overview

Burners are certified to work with SPECIFIC Log Sets only. While there may be several allowable Log Sets for a specific burner, they are NOT universal. Using a burner with a non-compatible log set can lead to Fire, Carbon Monoxide Poisoning and Property Damage.
The G31 burner is a Three Tiered Burner. The G31-18/20A has a manual burner and standing pilot. The G31-18/20-AP burner is for use with Liquid Propane but it is also available for use with Natural Gas. It is available for use with Natural Gas or Liquid Propane. This burner is for use with LP gas. One of the benefits of this burner are the beautiful, high, robust flames created, while using fewer BTUs than other vented burner systems. This burner should produce top flames that are approximately 3" - 5" above and between the logs with the center flame being the tallest. The middle flames should be at or below the top of the front log and the ember flames should be approximately 1/4" - 1" above the embers at the front of the burner.
 
This burner CANNOT be used with a remote control or wall switch. The G31 Burner is for use in a wood burning fireplace equipped with a gas line. Minimum fireplace dimensions for using the G31-18/20 Burner are:
  • 25" Front Width
  • 20" Rear Width
  • 15" Depth (The depth is measured from inside the lip.)
  • 17" Height
The G31 Burner (regardless of the valve and gas type chosen) can only be used with specific 18" gas logs. The burner was designed to work with:
  • Mountain Crest Oak (MCO18)
  • Mountain Crest Split Oak (MCS18)
  • Charred Angel Oak (CHNA18)
  • Charred Angel Split Oak (CHNS18)
Other log sets that are compatible with the G31 burner include:
  • Charred Oak (CHD18/20)
  • Charred American Oak (CHAO18/20)
  • Charred Royal English Oak (CHB18/20)
  • Charred Split (CHS18/20)
The G31 Burner system includes:
  • Burner pan with integrated grate
  • Vermiculite
  • Glowing embers
  • Lava Fyre Coals
  • Lava Granules
  • Glowing Embers
  • Bryte Coals
  • Flex connector kit
  • Damper clamp
Log set is sold separately.

Tech Specs

General Features

Fireplace Style:
Single Sided
Location of Use:
Indoor
Type of Venting:
Vented
Media Style:
Traditional Log Set
Type of Grate:
Standard
Fuel Type:
Liquid Propane (LP)
Allowable Log Set Sizes (in.):
18" / 20"
Allowable Log Sets:
Charred Series
Certified Usage:
Mobile Home Approved

Performance

BTUs (Max.):
40000
Ignition Type:
Manual (No Remote)
Remote:
Not Available

Gas Requirements

Gas Connection Size (in.):
1/2"
Manifold Pressure (in.):
NA
Inlet Gas Pressure (Min.):
11.0" w.c.
Inlet Gas Pressure (Max.):
13.0" w.c.

Minimum Firebox Requirements

Requirements for 18" Logs

Req. Min. Front Width (in.):
25"
Req. Min. Rear Width (in.):
20"
Req. Min. Depth (in.):
15"
Req. Min. Height (in.):
17"
Chimney Height (Min. ft.):
15'
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov