Product Overview
265V Units are Not Made for Residential Applications. This Unit is for Commercial Use Only.
Hotpoint PTAC units are easy to install, simply remove the old and slide in the new! The AHHS12E3XXA Hotpoint PTAC unit comes with a 20 amp, 265 volt power cord included. New installations require a grille and wall sleeve, however if you are replacing a PTAC unit, your current grille and sleeve may be fine. Hotpoint has a long history as an industry leader in the appliance and comfort control industries.
As the US moves away from R410A refrigerant, manufacturers are using alternative replacement refrigerants. R32 is the replacement refrigerant being used in Hotpoint's PTAC line. R32 features a Global Warming Potential (GWP) of 675. The larger the GWP, the more that specific gas warms the Earth. Below is a comparison chart of GWPs now being used by manufacturers versus R410A which is being phased out.
As an owner/operator, you have temperature limiting options that allows you to select one of four temperature ranges for total comfort and peak efficiency. Hotpoint also offers Intuitive Display which allows owners and guests to easily customize their preferred settings on the easy-to-use control panel. The control panel features soft touch pads to easily select the temperature, mode and fan speed. Indicator lights display mode and fan speeds as well as an LCD display for temperature. The unit can display temperature in either °F or °C.
A nine-point diagnostic code system helps to easily identify service needs on your Hotpoint PTAC unit. In the event of a power failure, the Auto Power Recovery feature on Hotpoint PTACs will automatically restart your unit in the mode it was in when power was lost. Additionally, they also offer Freeze and Frost Protection to help keep your unit in top top condition. A sensor on the indoor coil monitors the coil temperature and turns the compressor off until the coils warms up. The fan will continue running when this occurs.
Other standard features for the Hotpoint PTAC units include:
- Remote Thermostat Capability
- 24 VAC remote wall thermostat capability (requires thermostat connect kit RAKETKH, sold separately)
- Central Desk Control Capability
- Removable Filters for easy maintenance
- Tangential Fan for smooth airflow and low sound
The AHHS12E3XXA is a 265V commercial PTAC cooling with reverse cycle heat pump and electric back-up heat unit. It has a cooling capacity of 12,200 BTUs, 11,000 BTUs heat pump and features and 10.4 EER rating and 3.1 COP. The 20 amp power cord will deliver 3.5 kW of electric back-up heat.
This model meets the requirements for use in California and Washington.
New installations require a sleeve and a rear grille. These items are not included with the air conditioner. Fits a standard PTAC Sleeve Size (WxHxD): 42" x 16 1/16" x 14 1/8". The cut-out dimensions for this unit are 42-1/4"w x 16-1/4"h.
Tech Specs
General Features
Performance @265 Volt
Features
Electrical Requirements
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
