Friedrich VHA12R25RTP Vert-I-Pak 12000 BTU Single Vertical Packaged Air System with Heat Pump (VTAC) - 11 EER - 265 Volt - 2.5 kW Electric Heat

Sku:
FRIEDRICH-VHA12R25RTP
Currently Unavailable
$2,459.00 $2,342.00
FOR COMMERCIAL USE ONLY - 265 VOLTS
Give your property a homelike appearance with a Vert-I-Pak Vertical Packaged Air System - a simpler way to condition multiple rooms. Vert-I-Pak fits neatly into a typical mechanical closet, so you can create indoor living spaces that are more versatile. Since the system fits into a closet with an outside wall, guests and tenants will enjoy a quieter, visually appealing living space, without giving up individual, in-room temperature control or access to windows. Even quieter operating sound levels may be achieved by insulating the closet. Additionally, to help further eliminate vibration noise, the unit slides into the wall plenum and is sealed with a gasket. The unit also includes extra thick grommets, mounted on the base.
 
The VHA12R is a 265 Volt Unit for Commercial Use Only and features 11500 BTUs of cooling comfort and 10600 BTUs of heat from the heat pump. With 12000 BTUs you can cool a room that is about 450 sq. ft. or about 20' x 23'.
 
With a vertical packaged air system you get several installation possibilities:
  • A Simpler Way to Condition Multiple Rooms - A single unit may be ducted for flexible zone cooling in multiple rooms.
  • Installs as easily as a PTAC - All units are pre-wired, charged and piped, so only electrical hook up is needed to be up and running.
  • A Better System Inside and Out - Ideal for extended stay properties, suites, assisted living facilities and student housing. A Friedrich vertical system is also compatible with wired and wireless energy management systems.
The Friedrich Vert-I-Pak Systems are available with your choice of electric back-up heater size. The VHA12R25RTP includes a 2.5 Kw electric heater and requires a 15 Amp circuit. Other options of electric heat include a 3.4 Kw (20 Amp circuit) (VHA12R34RTP) and 5.0 Kw (30 Amp circuit) (VHA12R50RTP).
 
Features of the Vert-I-Pak include:
  • R-410A refrigerant
  • Compact and lightweight
  • Unique free-floating chassis
  • 10” crimped and beaded duct-collar ready to attach flex-duct
  • Easy to connect right, left or rear drain connection
  • Corrosion resistant interior
  • Easy to install front, left or right hand into closet on an outside wall (Does not require an HVAC technician)
  • Remote thermostat ready; 24V transformer
  • Standard safety power disconnect
  • Electronic control panel on unit for easy diagnostics and servicing
  • Architectural louver, single stage thermostats (WRT2, RT7 and RT7P) and return air grilles and (VPRG4) are available separately
  • Architectural louvers are required and available in standard extruded aluminum (VPAL2) or as a custom color option requiring special handling (VPSC2)
  • Eliminates the clutter of split systems and the need for multiple PTACs
  • No refrigerant lines running from floor to floor
 
 265V
Electric Heat Data:  
Watts: 2500
BTUs: 8500
Heating Amps: 11.0
Minimum Circuit Ampacity: 14.2
Branch Circuit Fuse (Amps): 15
Basic Heater Size: 2.5 kW
Friedrich VHA12R25RTP Vert-I-Pak 12000 BTU Single Vertical Packaged Air System with Heat Pump (VTAC) - 11 EER - 265 Volt - 15 Amp
  • Friedrich VHA12R25RTP Vert-I-Pak 12000 BTU Single Vertical Packaged Air System with Heat Pump (VTAC) - 11 EER - 265 Volt - 15 Amp
  • Friedrich VHA12R25RTP Vert-I-Pak 12000 BTU Single Vertical Packaged Air System with Heat Pump (VTAC) - 11 EER - 265 Volt - 2.5 kW Electric Heat
  • Friedrich VHA12R25RTP Vert-I-Pak 12000 BTU Single Vertical Packaged Air System with Heat Pump (VTAC) - 11 EER - 265 Volt - 2.5 kW Electric Heat
  • Friedrich VHA12R25RTP Vert-I-Pak 12000 BTU Single Vertical Packaged Air System with Heat Pump (VTAC) - 11 EER - 265 Volt - 2.5 kW Electric Heat
  • +1
Product Videos

Product Overview

FOR COMMERCIAL USE ONLY - 265 VOLTS
Give your property a homelike appearance with a Vert-I-Pak Vertical Packaged Air System - a simpler way to condition multiple rooms. Vert-I-Pak fits neatly into a typical mechanical closet, so you can create indoor living spaces that are more versatile. Since the system fits into a closet with an outside wall, guests and tenants will enjoy a quieter, visually appealing living space, without giving up individual, in-room temperature control or access to windows. Even quieter operating sound levels may be achieved by insulating the closet. Additionally, to help further eliminate vibration noise, the unit slides into the wall plenum and is sealed with a gasket. The unit also includes extra thick grommets, mounted on the base.
 
The VHA12R is a 265 Volt Unit for Commercial Use Only and features 11500 BTUs of cooling comfort and 10600 BTUs of heat from the heat pump. With 12000 BTUs you can cool a room that is about 450 sq. ft. or about 20' x 23'.
 
With a vertical packaged air system you get several installation possibilities:
  • A Simpler Way to Condition Multiple Rooms - A single unit may be ducted for flexible zone cooling in multiple rooms.
  • Installs as easily as a PTAC - All units are pre-wired, charged and piped, so only electrical hook up is needed to be up and running.
  • A Better System Inside and Out - Ideal for extended stay properties, suites, assisted living facilities and student housing. A Friedrich vertical system is also compatible with wired and wireless energy management systems.
The Friedrich Vert-I-Pak Systems are available with your choice of electric back-up heater size. The VHA12R25RTP includes a 2.5 Kw electric heater and requires a 15 Amp circuit. Other options of electric heat include a 3.4 Kw (20 Amp circuit) (VHA12R34RTP) and 5.0 Kw (30 Amp circuit) (VHA12R50RTP).
 
Features of the Vert-I-Pak include:
  • R-410A refrigerant
  • Compact and lightweight
  • Unique free-floating chassis
  • 10” crimped and beaded duct-collar ready to attach flex-duct
  • Easy to connect right, left or rear drain connection
  • Corrosion resistant interior
  • Easy to install front, left or right hand into closet on an outside wall (Does not require an HVAC technician)
  • Remote thermostat ready; 24V transformer
  • Standard safety power disconnect
  • Electronic control panel on unit for easy diagnostics and servicing
  • Architectural louver, single stage thermostats (WRT2, RT7 and RT7P) and return air grilles and (VPRG4) are available separately
  • Architectural louvers are required and available in standard extruded aluminum (VPAL2) or as a custom color option requiring special handling (VPSC2)
  • Eliminates the clutter of split systems and the need for multiple PTACs
  • No refrigerant lines running from floor to floor
 
 265V
Electric Heat Data:  
Watts: 2500
BTUs: 8500
Heating Amps: 11.0
Minimum Circuit Ampacity: 14.2
Branch Circuit Fuse (Amps): 15
Basic Heater Size: 2.5 kW

Tech Specs

General Features

Refrigerant Type:
R410A
Compressor:
Standard
Energy Star:
No
Dehumidification (pts/hr):
NA
CFMs (@ 0.1 ESP):
430 / 490 (L / H)
Includes Heat Mode:
Yes
Heat Type:
Heat Pump with Back-Up Electric
Electric Heat kW:
2.5

Performance @265 Volt

Cooling BTUs (@265V):
11500
EER (@265V):
11.0
Cooling Amps (@265V):
4.0
Cooling Watts (@265V):
1045
Heat Pump BTUs (@265V):
10600
COP (@265V):
3.3
Heat Pump Heating Amps (@265V):
3.7
Heat Pump Heating Watts (@265V):
940

Features

Vent Location:
Ducted Into Room
Make-Up Air:
No
Energy Saver Mode:
No
Fan Speeds:
2
Control Type:
Wall Thermostat Required (NOT INCLUDED)
Connectivity:
Not WiFi Compatible
Fresh Air Intake:
No

Weights and Dimensions

Overall Depth (in.):
23
Overall Width (in.):
23
Overall Height (in.):
32
Weight (lbs.):
125

Electrical Requirements

Voltage:
265-277V
Circuit Breaker Size (Amps):
15

Electric Heat Performance

Electric Heat Performance @265V:
See Description
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Product Warranty

  • Parts and Labor Warranty - 1 year
  • Sealed System Warranty - 5 years