Friedrich FSHW243 24000 BTU Floating Air Select Series Single Zone Mini Split - Heat and Cool - 230V

Sku:
FRIEDRICH-FSHW243
Usually Leaves Warehouse in 5 - 7 Business Days
$1,979.00 $1,781.00
products.you_save

Friedrich FSHW243 24,000 BTU single zone mini split system includes both the FSHSW24A3A wall unit and the FSHSR24A3A outdoor compressor. Inverter Technology is only the beginning of the standard money-saving features included with Friedrich Floating Air Select Series ductless mini split systems. This technology offers the consumer the ability to run their system much more efficiently, and reduce energy costs all while cooling the space and reaching the desired set temperature more quickly. To help keep the room at a comfortable level, longer, the compressor runs at a lower speed instead of shutting off completely. This helps the system to maintain the set temperature, alleviating the need for the system to start up again from a completely shut down state.

The FSHW243 mini split is a 208/230 Volt, cooling with heat pump system. It features high efficiency ratings including a 18.0 SEER and 11.0 EER. The built-in low ambient cooling capabilities will cool your space when outside temperatures are as low as 0°F. The 24,000 BTU heat pump will work hard to keep you warm. As expected the rated heating capacity does reduce as the temperatures fall. This system cannot be used as a primary heating source for most of the country, but it will give you 14,600 BTUs at 17°F. With its low ambient heating capacity, it will continue to provide heat even with temperatures down to -13°F. If you are need to cool a server room or other equipment year round, this unit's low ambient cooling features make it a great choice.

Friedrich's Select Series Floating Air wall unit feature 24,000 BTUs will cool a room that is about 1200 sq. ft. Factors such as windows, doors, computers and ceiling height must be factored in when calculating the BTUs you need for your specific installation requirements. 

Features of the Standard Wall unit include:

  • Auto/Cool/Dry/Fan Only/Heat Modes
  • Turbo Mode - maximum performance to quickly bring the room to set temperature 
  • Quiet operation
  • 4 Fan speeds
  • Remote
  • Continuous Air Sweep up & down
  • Auto-shut flaps when unit is off
  • Auto restart after power failure
  • 24-hour timer and sleep timer
  • Brief display of set or room temperature

In contrast to central air conditioning, which cools your entire house whenever the system turns on, a mini split cools only the space you want cooled, when you want it cooled! When you install a mini split system, you get all the benefits of individualized room comfort control without losing your view or having to remove and store your unit in the off season. Installation of a mini split system is permanent and non-obtrusive. Installing a Friedrich Mini Split is a relatively easy undertaking. Mini split systems do not require duct work and your system should be up and running in a few hours*.

The outdoor unit is pre-charged with R410A refrigerant for 25 feet of line. Additionally, the line sets can be as long as 66 feet between the compressor and the indoor unit with a 65 foot height difference. Line sets are sold separately.

*This unit must be installed by a qualified licensed HVAC technician.

The Friedrich Floating Air Select Series ductless mini split system comes with a 5 year parts and 5 year compressor Manufacturer's warranty. When purchased from Total Home Supply an upgraded warranty to 10 year parts and 10 years compressor (at no charge) is included. The option of adding a 5 year labor warranty to your coverage is also available (separately) at the time of purchase.

FREE SHIPPING ON ALL ORDERS!
Friedrich FSHW121 12000 BTU Floating Air Select Series Single Zone Mini Split - Heat and Cool
  • +1
Product Video

Product Overview

Friedrich FSHW243 24,000 BTU single zone mini split system includes both the FSHSW24A3A wall unit and the FSHSR24A3A outdoor compressor. Inverter Technology is only the beginning of the standard money-saving features included with Friedrich Floating Air Select Series ductless mini split systems. This technology offers the consumer the ability to run their system much more efficiently, and reduce energy costs all while cooling the space and reaching the desired set temperature more quickly. To help keep the room at a comfortable level, longer, the compressor runs at a lower speed instead of shutting off completely. This helps the system to maintain the set temperature, alleviating the need for the system to start up again from a completely shut down state.

The FSHW243 mini split is a 208/230 Volt, cooling with heat pump system. It features high efficiency ratings including a 18.0 SEER and 11.0 EER. The built-in low ambient cooling capabilities will cool your space when outside temperatures are as low as 0°F. The 24,000 BTU heat pump will work hard to keep you warm. As expected the rated heating capacity does reduce as the temperatures fall. This system cannot be used as a primary heating source for most of the country, but it will give you 14,600 BTUs at 17°F. With its low ambient heating capacity, it will continue to provide heat even with temperatures down to -13°F. If you are need to cool a server room or other equipment year round, this unit's low ambient cooling features make it a great choice.

Friedrich's Select Series Floating Air wall unit feature 24,000 BTUs will cool a room that is about 1200 sq. ft. Factors such as windows, doors, computers and ceiling height must be factored in when calculating the BTUs you need for your specific installation requirements. 

Features of the Standard Wall unit include:

  • Auto/Cool/Dry/Fan Only/Heat Modes
  • Turbo Mode - maximum performance to quickly bring the room to set temperature 
  • Quiet operation
  • 4 Fan speeds
  • Remote
  • Continuous Air Sweep up & down
  • Auto-shut flaps when unit is off
  • Auto restart after power failure
  • 24-hour timer and sleep timer
  • Brief display of set or room temperature

In contrast to central air conditioning, which cools your entire house whenever the system turns on, a mini split cools only the space you want cooled, when you want it cooled! When you install a mini split system, you get all the benefits of individualized room comfort control without losing your view or having to remove and store your unit in the off season. Installation of a mini split system is permanent and non-obtrusive. Installing a Friedrich Mini Split is a relatively easy undertaking. Mini split systems do not require duct work and your system should be up and running in a few hours*.

The outdoor unit is pre-charged with R410A refrigerant for 25 feet of line. Additionally, the line sets can be as long as 66 feet between the compressor and the indoor unit with a 65 foot height difference. Line sets are sold separately.

*This unit must be installed by a qualified licensed HVAC technician.

The Friedrich Floating Air Select Series ductless mini split system comes with a 5 year parts and 5 year compressor Manufacturer's warranty. When purchased from Total Home Supply an upgraded warranty to 10 year parts and 10 years compressor (at no charge) is included. The option of adding a 5 year labor warranty to your coverage is also available (separately) at the time of purchase.

Tech Specs

Bundle Includes:
FRIEDRICH-FSHSW24A3A, FRIEDRICH-FSHSR24A3A
Indoor Unit Type:
Wall Mount
EER:
11.0
SEER:
18
Energy Star:
No
Cooling BTUs:
24000
Cooling BTU Output Range:
8600 - 24000
Cooling Amps:
17.0
Dehumidification (pts/hr):
4.23
Includes Heat Pump:
Yes
Heat Pump BTUs:
24000
Heating BTU Output Range:
8600 - 26000
Heat Pump Heating Amps:
9.45
HSPF (non-ducted):
10.0
CFMs:
588 / 441 / 306 / 206 (H / M / L / Q)
Fan Speeds:
4
Room Size Coverage:
Extra Large 800+ Sq. Ft.
Min. Indoor Noise Level (dBA):
36
Indoor Noise Level (dBA):
49 / 46 / 42 / 36 (H / M / L / Q)
Outdoor Unit Noise Level (dBA):
58
Control Type:
Hand Held Remote
Wired Thermostat Optional:
Optional
Voltage:
208-230V
Circuit Breaker Size (Amps):
25
Line Set Liquid Line:
1/4"
Line Set Suction Line:
5/8"
Maximum Elevation (ft.):
65.6
Maximum Pipe Length (ft.):
82
Pipe Length (No Addl Refr Req):
25
Operating Range - Cooling:
0°F - 115°F
Operating Range - Heating:
-13°F - 75°F
Min. Outdoor Temp for Heat °F:
-13
Inverter Technology:
Yes
Indoor Unit Width (in.):
42.5
Indoor Unit Depth (in.):
10
Indoor Unit Height (in.):
12.875
Outdoor Unit Width (in.):
37.625
Outdoor Unit Depth (in.):
15.625
Outdoor Unit Height (in.):
27.625
Indoor Unit Weight (lbs.):
37.5
Outdoor Unit Weight (lbs.):
103.6
Certifications:
ETL, ETLc
Parts Warranty:
10 Years
Labor Warranty:
None
Compressor Warranty:
10 Years
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov