Empire Comfort Systems GWT-50W 50,000 BTU Gravity Vented Dual Wall Furnace

Sku:
EMPIRE-GWT50W
Backorder

Estimated shipping is 8 - 10 weeks

$1,759.00
 
Empire's gravity vented furnaces feature state-of-the-art technology for the highest fuel efficiency, making them an economical investment. The patented burner design reduces NOx emissions by 50% for cleaner operation.
 
With 50,000 BTUs, the GWT-50 will comfortably heat two rooms that share a common wall. Each room will be heated with 25,000 BTUs. Gas heaters will continue to heat even during a power outage. Plus, an optional blower (GWTB-2W) is available to help circulate the warmth within the rooms you are heating! If you have installed a blower however, the blower will not operate during a power outage as it requires electricity. A blower can be installed on each side of your heater to circulate the heat in each room.
  • Gas heat is less expensive than electric heat
  • Optional Wall or Built-in Thermostats require no electricity (no thermostat is included with this item)
  • B-Vent System - must be vented up and out through the roof
  • 66% AFUE Efficiency
 
A header is included with your heater. However, in the event that you would like to finish the wall before your heater is installed, a header is available separately for installation prior to furnace installation.
 
Note: This item is available in Liquid Propane (GWT-50W-LP) and Natural Gas (GWT-50W-NAT). This item replaces the GWT50 gravity vent furnace. 
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs. Empire Comfort System warranty covers parts only, no labor.
FREE SHIPPING ON ALL ORDERS!
Empire Comfort Systems GWT-50 50,000 BTU Gravity Vented Dual Wall Furnace
  • Empire Comfort Systems GWT-50 50,000 BTU Gravity Vented Dual Wall Furnace
  • Empire Comfort Systems GWT-50W 50,000 BTU Gravity Vented Dual Wall Furnace

Product Overview

 
Empire's gravity vented furnaces feature state-of-the-art technology for the highest fuel efficiency, making them an economical investment. The patented burner design reduces NOx emissions by 50% for cleaner operation.
 
With 50,000 BTUs, the GWT-50 will comfortably heat two rooms that share a common wall. Each room will be heated with 25,000 BTUs. Gas heaters will continue to heat even during a power outage. Plus, an optional blower (GWTB-2W) is available to help circulate the warmth within the rooms you are heating! If you have installed a blower however, the blower will not operate during a power outage as it requires electricity. A blower can be installed on each side of your heater to circulate the heat in each room.
  • Gas heat is less expensive than electric heat
  • Optional Wall or Built-in Thermostats require no electricity (no thermostat is included with this item)
  • B-Vent System - must be vented up and out through the roof
  • 66% AFUE Efficiency
 
A header is included with your heater. However, in the event that you would like to finish the wall before your heater is installed, a header is available separately for installation prior to furnace installation.
 
Note: This item is available in Liquid Propane (GWT-50W-LP) and Natural Gas (GWT-50W-NAT). This item replaces the GWT50 gravity vent furnace. 
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs. Empire Comfort System warranty covers parts only, no labor.

Tech Specs

General Features

Installation Type:
Recessed Wall Mount
Fuel Type:
Choice NG / LP
Installation Kit:
Not Included

Performance Data

Heating BTUs:
50000
Heating BTUs (Output):
NA
AFUE Efficiency:
NA

Venting

Type of Venting:
B-Vent
Vent Connection Size (in.):
Oval to 4" Round
Flue Outlet Tube (in.):
NA

System Data

Blower:
Optional
Ignition Type:
Standing Pilot
Control Type:
Wall Thermostat Required (NOT INCLUDED)

Gas Requirements

Gas Connection Size:
1/2"
Manifold Pressure (in.):
3.5" w.c. (NG) / 10.0" w.c. (LP)
Inlet Gas Pressure (Min.):
4.5" w.c. (NG) / 11.0" w.c. (LP)
Inlet Gas Pressure (Max.):
10.5" w.c. (NG) / 13.0" w.c. (LP)

Clearances

Top to Ceiling (in.):
12
Bottom to Floor (in.):
1.5
To Side Wall (in.):
4

Weights and Dimensions

Width (in.):
16
Depth (in.):
6
Height (in.):
66.125
Net Weight (lbs.):
131
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov