Williams Furnace Company 650252A 65,000 BTU Vented Hearth Heater with Fireplace Front

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
WILLIAMS-FURNACE-650252A
Williams Not Quite Winter Warm Up
​The console heater features a fireplace front, including ceramic fiber logs, and is perfect for those hard to heat areas. It features fixed louvers/vents on the top. Conveniently compact - 34"w x 19 5/8"d x 32 7/8"h - yet highly efficient, this vented hearth heater by Williams Furnace Company is ideal in homes, apartments, offices, schools, and more.
 
Operating at a powerful 65,000 BTU/hr, this heater vents to the outside, up and out through the roof or chimney, and features a louvered top for optimal heat circulation throughout any room.
 
Designed for maximum efficiency, low fuel consumption, and quiet operation, this heater is a super solution for your heating requirements. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate. All wiring and controls are easily accessible from the front of the unit.
 
This console heater has an optional blower available separately. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat. This heater is available as Natural Gas (6502522A) or Liquid Propane (6502521A). An optional blower is also available (field installed; sold separately) for this heater. It is also available with a factory installed blower. Please select your options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat at the time of purchase. 
  • No electricity required (without blower)
  • 5" Vent size
  • Burners engineered for quiet ignition and maximum heat efficiency
  • Louvered-top design and front grille for improved heat circulation
  • Resettable vent switch
  • Convertible gas valves
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.

 

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately.

$1,555.00 $1,425.00
(You save $130.00)
Williams Furnace Company 650252A 65,000 BTU Vented Hearth Heater with Fireplace Front
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
Williams Not Quite Winter Warm Up
​The console heater features a fireplace front, including ceramic fiber logs, and is perfect for those hard to heat areas. It features fixed louvers/vents on the top. Conveniently compact - 34"w x 19 5/8"d x 32 7/8"h - yet highly efficient, this vented hearth heater by Williams Furnace Company is ideal in homes, apartments, offices, schools, and more.
 
Operating at a powerful 65,000 BTU/hr, this heater vents to the outside, up and out through the roof or chimney, and features a louvered top for optimal heat circulation throughout any room.
 
Designed for maximum efficiency, low fuel consumption, and quiet operation, this heater is a super solution for your heating requirements. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate. All wiring and controls are easily accessible from the front of the unit.
 
This console heater has an optional blower available separately. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat. This heater is available as Natural Gas (6502522A) or Liquid Propane (6502521A). An optional blower is also available (field installed; sold separately) for this heater. It is also available with a factory installed blower. Please select your options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat at the time of purchase. 
  • No electricity required (without blower)
  • 5" Vent size
  • Burners engineered for quiet ignition and maximum heat efficiency
  • Louvered-top design and front grille for improved heat circulation
  • Resettable vent switch
  • Convertible gas valves
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.

 

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately.

  • Heating BTUs:
    65000
  • Heating BTUs (Output):
    47000
  • Type of Venting:
    B-Vent
  • Mounting:
    Freestanding
  • Thermal Efficiency:
    72%
  • AFUE Efficiency:
    70%
  • Blower:
    Optional
  • Vent Connection Size (in.):
    5
  • Center of Vent to Floor (in.):
    24.75
  • Gas Connection Size:
    1/2"
  • Ignition Type:
    Standing Pilot
  • Clearance to Rear Wall (in.):
    6
  • Clearance to Side Wall (in.):
    6
  • Clearance Top to Ceiling (in.):
    57
  • Clearance Access Door Side:
    24
  • Width (in.):
    34
  • Depth (in.):
    19.625
  • Height (in.):
    32.875
  • Net Weight (lbs.):
    135
  • Certifications:
    CSA
  • Parts Warranty:
    1 Year
  • Labor Warranty:
    None
  • Combustion Chamber Warranty:
    10 Year