White Mountain Hearth Super Charred Oak Ceramic Fiber Logs are hand painted and crafted to reflect authentic oak logs found in nature. The Super Charred Oak Log Set includes six, beautifully crafted, charred log chunks to help give your room the warmth and coziness of a fire that has been burning for hours. Best of all there is no mess of ash or embers. This log set will stack nicely on an Empire Slope Glaze burner. Designed to showcase your logs beautifully, the Slope Glaze burner is lower in the front, higher in the back. The 18" set will look great in a 32 inch firebox without getting lost.
Inside the burner tubes, ceramic beads tumble about forcing the gas to move around, creating a more representative flame pattern, complete with dancing flames through and around the log stack. Vent-free gas logs generate consistent, controlled heat, without the mess, flare-ups and die-downs of a wood-burning fire. Get the look of a wood fire without the hassle of cutting the wood!
The Super Charred Oak Logs are available in 18" (LS18-C2S), 24" (LS24-C2S) and 30" (LS30-C2S) sizes. To correspond to your log set size, White Mountain Hearth's Slope Glaze Burners are available in 18", 24" and 30" sizes with several valve options to help meet your needs:
- VFSM - Manual (No Remote Available) - operates manually with Off/Pilot/3 position heat setting knob; Cannot be used with wall thermostat or remotes
- VFSR - Millivolt (Remote Available, Not Included) - Standing Pilot, On/Off Remote Ready, Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats - sold separately)
- VFSV - Variable Flame, Height Control (Includes Remote) - Standing pilot with four level flame height control.
- VFSE - Intermittent Pilot (Programmable Remote Included) - Electronic Ignition with Remote Thermostat and Variable Flame Height Control
Both the VFSM (Manual) and VFSV (Variable) models are certified for installation in a vented fireplace. When installed in a vented application, each can only be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A Damper Clamp is included for this purpose.
Your complete set will include the six piece Super Charred Oak Log Set and Burner/Grate Assembly (size, fuel type and valve chosen), Decorative Rocks, Glowing Embers (rock wool) for burner coverage, Valve Shield (VFSM model) and installation screws and damper clamp. The VFSV and VFSE models will include the Remote Kit.
|BTUs (Min./Max.)||Req. Min. Rear Width (in.) (A)||Req. Min. Depth (in.) (B)||Req. Min. Front Width (in.) (C)||Req. Min. Height (in.) (D)|
|18" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 32,000||21"||14"||32"||17"|
|VFSR- Millivolt Valve:||22,000 / 32,000||17"||14"||28"||17"|
|VFSV- Variable Flame Height:||21,000 / 32,000||17"||14"||28"||17"|
|VFSE- Intermittent Pilot:||26,000 / 32,000||17"||14"||28"||17"|
|24" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 36,000||27"||14"||34"||18"|
|VFSR- Millivolt Valve:||25,000 / 36,000||23"||14"||30"||18"|
|VFSV- Variable Flame Height:||24,000 / 36,000||23"||14"||30"||18"|
|VFSE- Intermittent Pilot:||28,800 / 36,000||23"||14"||30"||18"|
|30" Slope Glaze Burners:|
|VFSM - Manual Valve:||22,000 / 38,000||30"||14"||38"||20"|
|VFSR- Millivolt Valve:||26,000 / 38,000||26"||14"||34"||20"|
|VFSV- Variable Flame Height:||27,000 / 38,000||26"||14"||34"||20"|
|VFSE- Intermittent Pilot:||30,000 / 38,000||26"||14"||34"||20"|
A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
State and local codes in some areas prohibit the use of vent free products.
PLEASE CHECK YOUR LOCAL BUILDING CODES BEFORE ORDERING OR INSTALLING A VENT FREE PRODUCT.