Product Overview
Designed for cleaning older hydronic heating systems, Sentinel X800RD Fast Acting Cleaner is a solubilizing treatment. It is sent through the heating system and then the system MUST be drained / flushed to remove all of the debris. The X800 is fast acting and usually only takes about an hour to clean a system. Once your system is restored with X400, you should notice lower bills and a warmer home. By cleaning / restoring your system with X400, all of the build-up inside has been loosened and flushed out, creating a cleaner environment for the water in your system.
Ideally, any hydronic system should be cleaned with an appropriate Sentinel cleaner such as X400 or X800. Sentinel X800 can be used in any hydronic system. The minimum cleaning time for X800 is about 1 hour. To clean the system, Sentinel X800 Rapid-Dose is circulated throughout the system, preferably at normal operating temperature, with all valves open and the pump turned to maximum flow for a minimum period of about an hour. One can is sufficient for a typical residential 25 gallon system. Larger systems require 2 cans. Following your cleaning and flushing, a product such as X100 should be used. Because X100 is a leave-in treatment, no unit flushing is required once the can is dispensed into the system. Additionally the X100 formula will maintain the stability of the pH levels of the system water. It is recommended that X100 inhibitor is part of your annual boiler servicing the maintain protection.
Key Features of X800 Fast Acting Cleaner Rapid Dose Can:
- Unrivalled chemical technology reduces circulation time to just 1 hour
- Targeted dissolution of corrosion debris
- Works in cold systems
- Ideal for power flushing
