Rinnai RUR199e 9.8 GPM Sensei+ Condensing Tankless Hot Water Heater for Outdoor Installation

Usually Leaves Warehouse in 2 - 3 Business Days
Sku:
RINNAI-RUR199E

The Rinnai RUR199 is part of the Sensei SE+ Series, a line of super high efficiency, Energy Star Qualified, tankless hot water heaters. The RUR199 is for residential and commercial use. The RUR199 is available in either Natural Gas or Liquid Propane and must be purchased for indoor or outdoor use*. Indoor versus outdoor installation is not interchangeable and must be decided at time of purchase. Indoor installation of the RUR199 offers both concentric and PVC/CPVC venting. The RUR199e is for outdoor installation does not require venting.  Because of extreme temperatures and exposed water lines, outdoor / exterior installation it is not recommended in locations from Virginia and north. Also keep this in mind in mountainous regions of the country where extreme temperatures may also exist. 

The Rinnai Sensei Series with condensing technology offers built-in freeze protection down to -4°F on the outdoor units. The unit features an integrated check valve located between the turbo fan and the combustion chamber to prevent cold air from entering the venting system and backflow of exhaust in common vent applications. The Fiber Mesh Premix Burner helps to provide even flame distribution for optimal performance for any demand.

It features 199,000 BTUs and hot water delivery with a flow rate that ranges from 0.26 - 9.8 GPM. The minimum GPMs is perfect for low demand uses such as shaving, where warm water is needed but not at a high rate! It is the ideal tankless solution for a home with 3 - 4 bathrooms. The RUR199 is optimal for simultaneous use of 3 - 6 fixtures at one time. So 2 people can shower and get ready to go out, while someone else is washing the dishes, and not fear running out of hot water. The MC-91-2US controller is included with the water heater as part of the front panel. The default minimum temperature setting is 98° with a maximum of 120°F. The unit offers a maximum setting of 140°F with parameter adjustment. A parameter adjustment on the RUR199 unit can be made for greater hot water flow - up to 11 GPM - as well.

In a condensing tankless water heater, such as the RUR199, once you turn on the tap, cold water goes into tankless heater and the flame is activated. Water is pre-heated as it passes through the stainless steel heat exchanger then continues to be heated as it passes through the coils in the copper heat exchanger, exits the water heater, into your pipes and up to the fixture calling for the hot water. Depending on the amount of hot water called for, the flame adjusts accordingly to heat more or less water.

 

Condensing Illustration

Benefits of a Tankless Hot Water Heater:

  • Endless hot water - Heats water as it goes through the pipes, offering endless hot water for your home (or business)
  • Hot water on demand - Once you turn the water on, hot water runs through your pipes and out the faucet! Virtually no time or water is wasted waiting for the water to heat up
  • Highly Efficient - Gallon for gallon, you will spend less money heating your hot water. With a tankless system the water is heated on demand rather than sitting in a storage tank. A storage tank typically heats the water intermittently throughout the day and night not only when it is needed. This unit is Energy Star Qualified and features an Energy Factor of 0.96 (the closer to 1.0 the better)
  • Long lasting - Unlike a storage tank in which the water sits in the tank all the time creating sediment and rust, a tankless water heater will last longer
  • EZ Connect - Allows for connection of two units together

The RUR199 offers WiFi Technology (Control-R WiFi Module, sold separately) for remote monitoring, management. Remote diagnostics and monitoring requires a monitoring dealer. Rinnai service providers can monitor the efficiency of your tankless water heater with WiFi monitoring as well as send you automatic maintenance alerts and possibly offer faster service. The Control-R WiFi Module attaches right to your Rinnai tankless water heater. Simply download the mobile app and you can control your hot water from anywhere in the home, as well as activate recirculation (if installed). The Control-R also allows for pairability and voice activation with Amazon Alexa.

The RUR199 includes Rinnai's Circ-Logic 360 Recirculation Technology. Recirculation technology allows you to set patterns that coincide with your hot water usage. The Dedicated Mode works in conjunction with a dedicated return line and the integrated pump recirculates water from the RUR199 through the return line and back to the heater. If a dedicated return line is not available, installing a thermal bypass valve at the fixture furthest from the RUR199 is possible for use in the Crossover Mode. A Thermal Bypass Valve is included with this unit for use with the crossover recirculation mode. The MC-195T-US is a controller for recirculation (sold separately) and is not compatible with the Control-R WiFi controller

With a tankless hot water heater, space is rarely an issue. A Rinnai RUR199 tankless heater takes up a little more space than a carry-on suitcase - 26.4"h x 18.5"w x 11.4"d. They are designed to be installed on a wall with the following clearances:

  Clearances
Top: 
(0" from vent components) 
2"
Bottom / Ground:  12"
Front: 
(minimum of 24" required for servicing) 
0"
Front Exhaust:  24"
Sides:  2"

 

*Indoor and Outdoor Installation are specific to the model chosen. RUR199eP and RUR199eN are for outdoor installation and do not require venting while RUR199iP and RUR199iN are designed for indoor installation and venting is required. Both installation types are available in either Liquid Propane (P) or Natural Gas (N). Certified for installation in Manufactured (Mobile) Homes.

To find a local, Rinnai-trained Advanced Comfort Expert that installs Rinnai products in your area click here.

$2,014.50
Pay Over Time with 0% interest!* ?×Disclosure: *Interest will be charged to your account from the transaction posting date at 19.99% APR if purchase balance is not paid in full by the end of the applicable 6 or 12 month promo period. Minimum monthly payment required. If paid in full within 6 to 12 months
Learn More
Rinnai RUR199e 9.8 GPM Sensei+ Tankless Hot Water Heater for Outdoor Installation
Customer Reviews
FREE SHIPPING ON ALL ORDERS!

The Rinnai RUR199 is part of the Sensei SE+ Series, a line of super high efficiency, Energy Star Qualified, tankless hot water heaters. The RUR199 is for residential and commercial use. The RUR199 is available in either Natural Gas or Liquid Propane and must be purchased for indoor or outdoor use*. Indoor versus outdoor installation is not interchangeable and must be decided at time of purchase. Indoor installation of the RUR199 offers both concentric and PVC/CPVC venting. The RUR199e is for outdoor installation does not require venting.  Because of extreme temperatures and exposed water lines, outdoor / exterior installation it is not recommended in locations from Virginia and north. Also keep this in mind in mountainous regions of the country where extreme temperatures may also exist. 

The Rinnai Sensei Series with condensing technology offers built-in freeze protection down to -4°F on the outdoor units. The unit features an integrated check valve located between the turbo fan and the combustion chamber to prevent cold air from entering the venting system and backflow of exhaust in common vent applications. The Fiber Mesh Premix Burner helps to provide even flame distribution for optimal performance for any demand.

It features 199,000 BTUs and hot water delivery with a flow rate that ranges from 0.26 - 9.8 GPM. The minimum GPMs is perfect for low demand uses such as shaving, where warm water is needed but not at a high rate! It is the ideal tankless solution for a home with 3 - 4 bathrooms. The RUR199 is optimal for simultaneous use of 3 - 6 fixtures at one time. So 2 people can shower and get ready to go out, while someone else is washing the dishes, and not fear running out of hot water. The MC-91-2US controller is included with the water heater as part of the front panel. The default minimum temperature setting is 98° with a maximum of 120°F. The unit offers a maximum setting of 140°F with parameter adjustment. A parameter adjustment on the RUR199 unit can be made for greater hot water flow - up to 11 GPM - as well.

In a condensing tankless water heater, such as the RUR199, once you turn on the tap, cold water goes into tankless heater and the flame is activated. Water is pre-heated as it passes through the stainless steel heat exchanger then continues to be heated as it passes through the coils in the copper heat exchanger, exits the water heater, into your pipes and up to the fixture calling for the hot water. Depending on the amount of hot water called for, the flame adjusts accordingly to heat more or less water.

 

Condensing Illustration

Benefits of a Tankless Hot Water Heater:

  • Endless hot water - Heats water as it goes through the pipes, offering endless hot water for your home (or business)
  • Hot water on demand - Once you turn the water on, hot water runs through your pipes and out the faucet! Virtually no time or water is wasted waiting for the water to heat up
  • Highly Efficient - Gallon for gallon, you will spend less money heating your hot water. With a tankless system the water is heated on demand rather than sitting in a storage tank. A storage tank typically heats the water intermittently throughout the day and night not only when it is needed. This unit is Energy Star Qualified and features an Energy Factor of 0.96 (the closer to 1.0 the better)
  • Long lasting - Unlike a storage tank in which the water sits in the tank all the time creating sediment and rust, a tankless water heater will last longer
  • EZ Connect - Allows for connection of two units together

The RUR199 offers WiFi Technology (Control-R WiFi Module, sold separately) for remote monitoring, management. Remote diagnostics and monitoring requires a monitoring dealer. Rinnai service providers can monitor the efficiency of your tankless water heater with WiFi monitoring as well as send you automatic maintenance alerts and possibly offer faster service. The Control-R WiFi Module attaches right to your Rinnai tankless water heater. Simply download the mobile app and you can control your hot water from anywhere in the home, as well as activate recirculation (if installed). The Control-R also allows for pairability and voice activation with Amazon Alexa.

The RUR199 includes Rinnai's Circ-Logic 360 Recirculation Technology. Recirculation technology allows you to set patterns that coincide with your hot water usage. The Dedicated Mode works in conjunction with a dedicated return line and the integrated pump recirculates water from the RUR199 through the return line and back to the heater. If a dedicated return line is not available, installing a thermal bypass valve at the fixture furthest from the RUR199 is possible for use in the Crossover Mode. A Thermal Bypass Valve is included with this unit for use with the crossover recirculation mode. The MC-195T-US is a controller for recirculation (sold separately) and is not compatible with the Control-R WiFi controller

With a tankless hot water heater, space is rarely an issue. A Rinnai RUR199 tankless heater takes up a little more space than a carry-on suitcase - 26.4"h x 18.5"w x 11.4"d. They are designed to be installed on a wall with the following clearances:

  Clearances
Top: 
(0" from vent components) 
2"
Bottom / Ground:  12"
Front: 
(minimum of 24" required for servicing) 
0"
Front Exhaust:  24"
Sides:  2"

 

*Indoor and Outdoor Installation are specific to the model chosen. RUR199eP and RUR199eN are for outdoor installation and do not require venting while RUR199iP and RUR199iN are designed for indoor installation and venting is required. Both installation types are available in either Liquid Propane (P) or Natural Gas (N). Certified for installation in Manufactured (Mobile) Homes.

To find a local, Rinnai-trained Advanced Comfort Expert that installs Rinnai products in your area click here.

  • Fuel Type:
    Liquid Propane (LP) or Natural Gas (NG)
  • Installation Type:
    Outdoor
  • Product Use:
    Residential and Commercial
  • Energy Factor (EF):
    0.93
  • Gallons Per Minute (GPM):
    0.26 - 9.8
  • Venting:
    Not Required (Outdoor Installation)
  • Includes Heat Pump:
    No
  • Energy Star:
    No
  • Overall Depth (in.):
    11.4
  • Overall Height (in.):
    26.4
  • Overall Width (in.):
    18.5
  • Net Weight (lbs.):
    73
  • Water Connection Size:
    3/4" NPT
  • Heat Exchanger Warranty (Residential):
    15 Year
  • Heat Exchanger Warranty (Commercial):
    8 Year
  • Parts Warranty:
    5 Year
  • Labor Warranty:
    1 Year

It is recommended that you use a Rinnai Authorized Installer when installing your hot water heater. Your hot water heater includes a

Residential Warranty:

  • Limited 15 Year Warranty on Heat Exchanger
  • 5 Year Warranty on Parts
  • 1 Year Labor Warranty

Commercial Warranty:

  • Limited 8 Year Warranty on Heat Exchanger
  • 5 Year Warranty on Parts
  • 1 Year Labor Warranty

Please note Rinnai is adjusting the language in its warranty terms and conditions currently noted in the User Installation manuals. The revised statement will read as follows: "This Limited Warranty applies only to products that are installed in the United States and Canada. Improper installation may void this Limited Warranty. It is recommended that a trained and qualified professional who has attended a Rinnai installation training class complete your installation."

All warranties will be honored as written above.