RH Peterson Real-Fyre G31-18/20-2VTN 18" / 20" Three Tiered Vented Burner with Electronic Ignition and Variable Flame Remote - Natural Gas

Special Order
Sku:
RH-PETERSON-G3118202VTN
The G31 burner is a Three Tiered Burner. The G31-18/202VT has an Electronic Valve with Intermittent Pilot and Variable Flame Remote. The G31-18/20-2VTN burner is for use with Natural Gas but it is also available for use with Liquid Propane. One of the benefits of this burner are the beautiful, high, robust flames created, while using fewer BTUs than other vented burner systems. This burner should produce top flames that are approximately 3" - 5" above and between the logs with the center flame being the tallest. The middle flames should be at or below the top of the front log and the ember flames should be approximately 1/4" - 1" above the embers at the front of the burner.
 
The G31 Burner is for use in a wood burning fireplace equipped with a gas line. Minimum fireplace dimensions for using the G31-18/20 Burner are:
  • 25" Front Width
  • 20" Rear Width
  • 15" Depth (The depth is measured from inside the lip.)
  • 17" Height
The G31-18/20 Burner (regardless of the valve and gas type chosen) can only be used with specific 18" gas logs. The burner was designed to work with:
  • Mountain Crest Oak (MCO18)
  • Mountain Crest Split Oak (MCS18)
  • Charred Angel Oak (CHNA18)
  • Charred Angel Split Oak (CHNS18)
Other log sets that are compatible with the G31 burner include:
  • Charred Oak (CHD18/20)
  • Charred American Oak (CHAO18/20)
  • Charred Royal English Oak (CHB18/20)
  • Charred Split (CHS18/20)
The G31 Burner system includes:
  • Burner pan with integrated grate
  • Sand
  • Glowing embers
  • Lava Fyre Coals
  • Lava Granules
  • Glowing Embers
  • Bryte Coals
  • Flex connector kit
  • Damper clamp
  • Remote Kit including receiver, transmitter, batteries
  • Decorative heat shield
Log set is sold separately.
$1,296.25
RH Peterson Real-Fyre G31-18/20-17N 18" / 20" Three Tiered Vented Burner with Electronic Ignition and Variable Flame Remote - Natural Gas
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
The G31 burner is a Three Tiered Burner. The G31-18/202VT has an Electronic Valve with Intermittent Pilot and Variable Flame Remote. The G31-18/20-2VTN burner is for use with Natural Gas but it is also available for use with Liquid Propane. One of the benefits of this burner are the beautiful, high, robust flames created, while using fewer BTUs than other vented burner systems. This burner should produce top flames that are approximately 3" - 5" above and between the logs with the center flame being the tallest. The middle flames should be at or below the top of the front log and the ember flames should be approximately 1/4" - 1" above the embers at the front of the burner.
 
The G31 Burner is for use in a wood burning fireplace equipped with a gas line. Minimum fireplace dimensions for using the G31-18/20 Burner are:
  • 25" Front Width
  • 20" Rear Width
  • 15" Depth (The depth is measured from inside the lip.)
  • 17" Height
The G31-18/20 Burner (regardless of the valve and gas type chosen) can only be used with specific 18" gas logs. The burner was designed to work with:
  • Mountain Crest Oak (MCO18)
  • Mountain Crest Split Oak (MCS18)
  • Charred Angel Oak (CHNA18)
  • Charred Angel Split Oak (CHNS18)
Other log sets that are compatible with the G31 burner include:
  • Charred Oak (CHD18/20)
  • Charred American Oak (CHAO18/20)
  • Charred Royal English Oak (CHB18/20)
  • Charred Split (CHS18/20)
The G31 Burner system includes:
  • Burner pan with integrated grate
  • Sand
  • Glowing embers
  • Lava Fyre Coals
  • Lava Granules
  • Glowing Embers
  • Bryte Coals
  • Flex connector kit
  • Damper clamp
  • Remote Kit including receiver, transmitter, batteries
  • Decorative heat shield
Log set is sold separately.
  • Type of Venting:
    Vented
  • Fuel Type:
    Natural Gas (NG)
  • Valve Type/Ignition:
    Electronic Ignition with Variable Flame Remote Included
  • Fireplace Style:
    Single Sided
  • Type of Grate:
    Standard
  • Burner Use:
    Log Set
  • Allowable Log Set Sizes (in.):
    18"
  • Location of Use:
    Indoor
  • Req. Min. Front Width (in.):
    25"
  • Req. Min. Rear Width (in.):
    20"
  • Req. Min. Depth (in.):
    15"
  • Req. Min. Height (in.):
    17"