MrCool DIYCOUPLER-1412K50 Coupler with 50 Ft Wire for Mr. Cool DIY 9K - 18K Units - 1/4" x 1/2"

Line sets are required when installing a Mr. Cool Mini Split System. Mr. Cool Line Sets are available in 16' and 25' lengths. Sometimes an installation may require a longer length. By adding a coupler you can connect two lines together to extend the length of your line set. If you are adding 2 lines together you will need 50 ft of communication wire.

 

The DIYCOUPLER-1412K50 is a 1/4" x 1/2" coupler.  It includes 50 feet of communication wire for an unbroken run of wire from your indoor unit to your outdoor unit. Simply disconnect the 25 foot length of wire pre-attached to your indoor unit and replace it with the new 50 foot wire. It is for use with the 9,000, 12,000 and 18,000 BTU indoor wall units.

 

Up to 3 line sets can be connected together, giving you the possibility of a 75 foot length. Keep in mind that the total length for any Mr. Cool multi-zone system is 197' with a 75' maximum per zone. If you are connecting three line sets, you will need 2 couplers and 75 feet of wire (DIYCOUPLER-1412K75)!