The King W Economy Wall Heater is an electric, fan driven heater. It is a great option for adding supplemental heating into rooms where your central heat might just need a little boost. It boasts a fan blade and an open coil heating element behind a slatted front. The upper fan blade draws the air in and the heated air goes through the NiChrome coil element and is discharged through the bottom towards the floor. The W series features the option of two wattages to meet your heating needs. You can use this heater at full 2000 watts or drop it to 1000.
A single- or double-pole thermostat is available with this unit. A thermostat kit is easily added in the field. Simply remove the grill, pop the fan out, install the thermostat and pop it all back together. A knob is included with the thermostat to control your heater and it installs right through the front of the grill for easy access control. The heater is a quick installation as well. It features a 3.5" deep wall can frame that easily fits in a 4" wall and attaches easily to the studs.
Also, this heater includes King Electric's Patented Smart Limit Protection that automatically shuts off the power to the heater and must be manually reset. Additionally, there is a safety limit. If the fan intake is blocked, the heater will automatically trip and the heater will shut off. Once the blockage is cleared and the heater is re-set, it will go back to heating as usual.
The white grill face is only 5/8" thick giving you a nice thin look on your wall and features rounded corners with a front knockout hole for the thermostat knob. This unit is for use with 240V electricity and offers dual wattage with 1000 or 2000 Watts and a 1 year limited warranty.
- Type of Heat:
- Wall Mount
- Fan Driven
- Not Available
- Tip-Over Safety Switch:
- 1000 / 2000
- 4.2 / 8.3
- Wall Can Width (in.):
- Wall Can Height (in.):
- Wall Can Depth (in.):
- Grille Dimensions (H x W x D - in.):
- 10.375 x 13.625 x .625
- 1 Year Limited
- King Electrical Manufacturing Company will repair or replace, without charge to the original owner, any W Series heater found
to be defective or malfunctioning within 1 year of installation. This warranty requires the owner or his agent install the equipment in accordance with the National Electrical Code, any other applicable heating or electrical codes, and the manufacturer’s installation instructions. It further requires that reasonable and necessary maintenance be performed on the unit. Failure to properly maintain the unit will result in the warranty being voided. The company is not liable for abuse or misuse of
product as may be finally determined by the company.
- The customer shall be responsible for all costs incurred in the removal
or reinstallation of products, including labor costs and shipping costs incurred to return products to King Manufacturing. King
Manufacturing will repair or replace, at our option, at no charge to the customer with return freight paid by King.
- King Manufacturing shall not be liable for consequential damages arising with respect to the product, whether based upon negligence,
tort, strict liability or contract. No other written or oral warranty applies, nor any warranties by representatives dealers, employees of King, or any other person.
- All returns require a King Return Goods Authorization (RGA); Unauthorized returns will
be refused. Do not return malfunctioning/defective products to store.