A Vert-I-Pak Vertical Packaged Air System is a hidden air conditioning system that fits in a small closet. Since it is behind a closed door, your guests will be able to enjoy a quieter stay. Even quieter sound levels may be achieved if the closet is insulated.To help eliminate vibration noise, the unit slides into the wall plenum and a gasket seals it. Plus extra thick rubber grommets are mounted on the base.
The VEA09K34RTP is a cooling only system with 9000 BTUs and a 3.4kW Electric Back-up Heater. With a Vert-I-Pak, installation is as easy as installing a PTAC. Everything is charged, piped and pre-wired. Since it is installed in a closet, it give you additional options of conditioning more than one room. It is a perfect solution for suite hotels, assisted living and nursing homes, even dorm suites.
Electric Heat Data: | VEA09K34RTP |
Watts: | 3400/2780 |
BTUs: | 11600/9500 |
Heating Amps: | 14.8/13.4 |
Minimum Circuit Ampacity: | 19.9 |
Branch Circuit Fuse (Amps): | 20 |
Basic Heater Size: | 3.4 Kw |
Features of the Vert-I-Pak include:
- R-410A refrigerant used in all models
- Compact (about 2 sq. ft. of floor space)
- Unique free-floating chassis
- 10” crimped and beaded duct-collar ready to attach flex-duct
- Easy to connect right, left or rear drain connection
- Corrosion resistant interior
- Easy to install front, left or right hand into closet on an outside wall (Does not require an HVAC technician)
- Remote thermostat ready; 24V transformer
- Standard safety power disconnect
- All units are shipped (on pallet) with return air filter installed
- Electronic control panel on unit for easy diagnostics and servicing
- Architectural louvers are required and available in standard extruded aluminum (VPAL2) or as a custom color option requiring special handling (VPSC2)
- Architectural louver, single stage thermostats (WRT1) and (RT6) and return air grilles and (VPRG4) are available separately
- No refrigerant lines running from floor to floor