The BF20W produces an inviting atmospheric warmth quickly and efficiently. The BF-20W is equipped with a hydraulic thermostat and modulates from 8,500 BTUs to 20,000 BTUs for continuous temperature control. The modulating hydraulic thermostat upon reaching the preset comfort level, cycles the main burner flame from HI to LO and, when the thermostat is satisfied, to OFF while leaving the pilot on. This reduces the large flame to a smaller flame while still emitting heat. This blue flame heater features top mounted controls for convenience and ease of use, plus a push button igniter for matchless pilot lighting.
Vent-Free Products are intended to be used as a supplemental or secondary heat source. Freestanding floor "installation" is available with option white base (SRS-18W) and an optional white blower (SRB-18TW) is also available (each sold separately).
- Test-fired in the factory
- Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
- Quiet as a whisper
- Updated White Finish
- Durable, scratch-resistant finish
- Gas heats for less than half the cost of electricity
- Gas heat also continues to function in the event of a power outage
- 99.9% AFUE Efficiency Rating
If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you. This appliance may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes.
Available in Natural Gas (BF-20WN) and Liquid Propane (BF20WL).
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
PHOTO SHOWS HEATER MOUNTED ON OPTIONAL FLOOR STAND.
Vent-Free Products Cannot Be Shipped To The State Of California.