Daikin's new 8-Zone Multi-Split System, is the ultimate, flexible system for your individual comfort no matter what room you are in. The ability to connect from 2 to 8 indoor units to one single outdoor compressor reduces installation space and costs while maximizing comfort and energy savings. With a choice of three indoor unit types in a wide range of capacities, the 8-zone system allows mixed and matched combinations for absolute comfort in almost any residential or light commercial application. The RMXS48LVJU is rated for 48,000 BTU Cooling Capacity and 54,000 BTU Heating Capacity.
Below is an installation example. The photo below illustrates an example of an 8 zone installation. This installation requires one outdoor unit (RMXS48LVJU), two "y" connectors and three branch distribution boxes. The indoor units shown include 1 ceiling cassette, 5 wall mounted units and 2 slim duct ceiling units Of course, with the help of our sales staff, you can customize your indoor units to your requirements.
Each indoor unit has its own control, so each room can be set to different temperatures. In this example installation, the individual units are connected to a single exterior unit by way of the 3 branch provider units and 2 "y" connectors.
Daikin offers two branch provider units to help customize your installation. There is a 2 zone branch provider unit (BPMKS048A2U) which is rated to a maximum connection combination of 48,000 BTUs and a 3 unit (BPMKS049A3U) which is rated to a maximum of 62,000 BTU connection combination. Each box is rated for a minimum of 7,000 BTUs connection combination. Depending on how many indoor units you will be installing, the correct size distribution unit needs to be installed. However, you do not need to use all the ports available at the time of your initial installation. If you think you will be adding additional indoor units in the future, you can "cap off" the unused ports on the branch distribution units until that later time.
When installing two branch provider units, you will need to install a "Y" branch or piping connection kit (KHRP26A22T) to the line set to one of the branch provider units. If installing three branch provider units (as illustrated above), you will need 2 connection kits.
The RMXS48LVJU is rated for 48,000 BTU Cooling Capacity and can be connected to almost any combination of indoor units up to 8, totaling 62,000 BTUs (max.). The unit must be connected to a minimum of 2 units with a combined BTU rating of 24,000 BTUs.
- Outstanding heating performance down to 0° F with the optional wind baffle
- Space-saving design
- Quiet operation
- Inverter "variable speed" compressor
- Fully optimized for R410A refrigerant, recognized as the future industry standard
- Anticorrosion Treatment of Outdoor Heat Exchanger Fin
- Offers world-renowned Daikin technician support and customer service
- Indoor Wall Units (CTXS07LVJU, FTXS09LVJU, FTXS12LVJU, FTXS15LVJU, FTXS18LVJU, FTXS24LVJU):
- Ceiling Cassette Units (FFQ09Q2VJU, FFQ12Q2VJU, FFQ15Q2VJU)
- Slim Duct Units (FDXS09LVJU, FDXS12LVJU, CDXS15LVJU, CDXS18LVJU, CDXS24LVJU)