Amana PTAC air conditioners have been assembled in the USA for 30 years. They are built for efficiency and built to last, and are easy to install and use. An Amana PTAC will blend seamlessly into any room. It comes in a neutral Stonewood Beige that is both practical and non-obtrusive. It boasts one of the shallowest front depths available (7 5/8"), and it can be installed to flush to the floor.
This 7700 BTU PTAC is a 265 volt unit. It is not for residential use - it is for commercial use only! It will cool a room that is about 225 sq. ft. or about 15' x 15'. Of course, windows, doors, electronic equipment and ceiling height all must be taken into consideration. This PTAC is a cooling system with a 3.7 kw backup electric heater, powered by its included 20 amp cord. It has a 11.7 EER.
Every Amana PTAC is equipped with a 7-button touch pad and LED Display to easily control fan and cycle modes. The Amana PTAC comes with Digismart front desk controls and energy management software that allows the unit to be connected wirelessly to a central hub. Each unit also comes equipped with room freeze protection that activates the electric resistance heater when the PTAC senses temperatures of 40°F or below, providing protection from damage. An increased dehumidification capacity helps to maintain lower humidity levels in the room to allow you to feel more comfortable at higher temperatures.
Each unit is also equipped with washable, removable filters, a built-in filter dryer, and a removable filter shroud for easy access and cleaning of coils to ensure that your cooling unit continues to perform at optimum levels for years to come.
New installations require a sleeve and a rear grille. These items are not included with the air conditioner. Fits a standard PTAC Sleeve Size (WxHxD): 42" x 16 1/16" x 14 1/8". The cut-out dimensions for this unit are 42-1/4"w x 16-1/4"h.