HeatStar by Enerco offers gas powered, vent free heating options for your warmth and comfort. The HSSVFBF30 30000 BTU Blue Flame heater features a blower fan and thermostatic control. Blue Flame heaters heat the air in the room. Heating the air in a well insulated room will help keep you warmer longer. This heater will heat an area that is approximately 750 sq. ft. Although they may take a little longer for you to feel their warmth, because the air is heated, not the objects in a room, there is little downside to installing a blue flame heater.
Blue flame heaters are extremely economical, operating at 99.9% efficiency and the HeatStar heaters feature a built-in low oxygen shut-off sensor for safety.
This heater includes both the wall mount bracket as well as base feet. This gives you installation options best suited to your needs. For wall mounting, it is suggested that it be mounted 36 inches from the floor for accessibility. However, clearance to the floor when using the feet is a minimum of 3 inches (to the top of carpet). Clearance above the unit should be a minimum of 36 inches, while clearance on either side should be at least 10 inches.
This heater includes the AA batteries required for the Electronic "push-button" ignition. The thermostatic control knob offers 5 settings and modulates the flame as the temperature gets closer to the set point. The burner will cycle on and off based on the set temperature. Because it is gas powered, it will keep you warm, without electricity, during power outages. The blower fan will not operate during a power outage, but the heater will still generate heat to keep you warm and comfortable.
The 30000 BTU blue flame heater is available in your choice of Natural Gas (HSSVFBF30NGBT) or Liquid Propane (HSSVFBF30LPBT) .