Williams Furnace Company 3501A 35,000 BTU Vented Hearth Heater with Enclosed Front

Sku:
WILLIAMS-FURNACE-3501521A
Usually Leaves Warehouse in 1 - 2 Weeks
$1,235.00
 
At just 25" wide and under 30" high, this compact hearth heater is extremely efficient and ideal for hard-to-heat areas in homes, apartments, offices, schools, and more. Operating at 35,000 BTU input / 25,000 BTUs output, this heater has a louvered top and front grille to circulate the heat throughout any room.
 
Because it is a gas heater, it does not require electricity to heat (unless a blower is installed). It features a matchless ignition for added safety. All wiring and controls are easily accessible from the front of the unit. 
 
This console heater is available with an optional blower. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat.
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • 4" Vent size
  • Resettable vent switch
  • Convertible gas valves
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
This heater is available as:
  • Natural Gas - 3501522A AND Liquid Propane Gas - 3501521A

An optional blower is also available (field installed; sold separately) for this heater. It is also available with a factory installed blower. Please select your options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat at the time of purchase.

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately. 

FREE SHIPPING ON ALL ORDERS!
Williams Furnace Company 3501A 35,000 BTU Vented Hearth Heater with Enclosed Front
Product Video

Product Overview

 
At just 25" wide and under 30" high, this compact hearth heater is extremely efficient and ideal for hard-to-heat areas in homes, apartments, offices, schools, and more. Operating at 35,000 BTU input / 25,000 BTUs output, this heater has a louvered top and front grille to circulate the heat throughout any room.
 
Because it is a gas heater, it does not require electricity to heat (unless a blower is installed). It features a matchless ignition for added safety. All wiring and controls are easily accessible from the front of the unit. 
 
This console heater is available with an optional blower. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat.
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • 4" Vent size
  • Resettable vent switch
  • Convertible gas valves
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
This heater is available as:
  • Natural Gas - 3501522A AND Liquid Propane Gas - 3501521A

An optional blower is also available (field installed; sold separately) for this heater. It is also available with a factory installed blower. Please select your options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat at the time of purchase.

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately. 

Tech Specs

General Features

Installation Type:
Freestanding
Fuel Type:
Choice NG / LP

Performance Data

Heating BTUs:
35000
CFMs:
NA
AFUE Efficiency:
68%

System Data

Flame Type:
Not Visible
Blower:
Optional
Ignition Type:
Standing Pilot
Control Type:
Thermostatic

Connections

Gas Connection Size:
1/2"
Type of Venting:
B-Vent
Vent Connection Size (in.):
4"

Clearances

Top to Ceiling (in.):
57"
To Side Wall (in.):
6"
To Rear Wall (in.):
6"
Access Side (in.):
24"
Flue / Vent Connector:
NA

Weights and Dimensions

Width (in.):
25
Depth (in.):
15.375
Height (in.):
28.875
Net Weight (lbs.):
74

Electrical Requirements

Voltage:
110-120V
Amps:
NA
Circuit Breaker Amps:
15
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov