Product Overview
The S37 submersible sump pump features a vertical magnetic float switch. As the water rises, the float moves along its stem to the top of your pump. The switch turns the pump on (at about 8-1/4" up) and begins to empty the basin. Once the float reaches the bottom of your pump (approx. 2-3/4" from the bottom of the basin), the pump switches off. This action occurs as needed until the water stops entering the basin. The 1/3 horsepower motor is oil-filled and thermally protected, yet offers quiet operation and is built to last.
Have no fear if dirt and debris are mixed into your water. The S37 is equipped with 1/4" solids handling - reducing larger debris form entering the pump. A pump that offers solids handling allows solid particles and other materials through (up to 1/4" with the S37 pump), while transporting fluids. This sump pump also has a 25' max. head feet, auto shut off. The S37 also has a high capacity flow rate. As an example, at 10 ft. head, this pump will direct up to 35 gallons a minute up and out of your space!
At 13" high this sump pump sits at the bottom of your sump basin and will switch on when the water level reaches 8-1/4" high. It automatically turns off when the float is at 2-3/4" from the bottom of the basin. The depth of your sump basin should be at least 18" and at least 14" in diameter. Of course a larger basin would allow for a longer pump cycle and increase the longevity of your float switch. The S37 includes a 10' cord and is cast iron. Keep you sump pump basin covered to prevent debris and other foreign objects from getting into the basin.
Tech Specs
General Features
Sump Basin Dimensions
Weights and Dimensions
Electrical Requirements
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
