Product Overview
For your convenience, we are including a Universal Direct Connect Power Supply with this unit. Choose either a 20 amp or 30 amp hardwire kit.
The GE Zoneline Vertical Packaged Terminal Heat Pump has excellent COP (Coefficient of Performance) ratings. This is the measurement of the efficiency of the heat pump output compared to electric resistance heat. In addition to comparing heat pump output versus electric heat, this number also allows a direct comparison to other heat pumps with the same range capacity. The AZ95H18DAC features a COP of 3.3.
Similar to central heating systems, the GE Zoneline Vertical Heat Pump incorporates the use of a reverse cycle defrost system. This allows the heat pump to operate at lower outdoor temperatures without frost accumulation on the outdoor coil. This helps provide owners with a cost efficient method of heating. Additionally, the outdoor coils include a corrosion treatment for added protection from the elements.
A GE Vertical Air Conditioner (VTAC or Vertical PTAC) helps you optimize floor space because the unit is concealed in a closet with an outside wall rather than out in the open. With hidden installation, the room becomes more aesthetically appealing, giving it more of an at-home appearance, with no limitations on furniture placement or window treatment installation.
Although the VTAC is still a through-the-wall installation, its footprint is only about 24" x 24" and it is hidden inside an enclosure which looks like a closet, versus a standard PTAC unit which is installed in the room taking up over 42" of floor space. The VTAC uses a wall mounted thermostat and has a top air discharge that can be ducted into one or more rooms - perfect for suite set-ups. The design of the new AZ95H models includes a one-piece design, which fully integrates with the wall plenum and aligns for a tight seal. This design eliminates the need for building a customized platform on the construction site. Additionally it uses a Quick-Install Plenum that easily installs from inside the building without the need for exterior building access (caulking required).
Similar to central heating systems, the GE Zoneline Vertical Heat Pump incorporates the use of a reverse cycle defrost system. This allows the heat pump to operate at lower outdoor temperatures without frost accumulation on the outdoor coil. This helps provide owners with a cost efficient method of heating. Additionally, the outdoor coils include a corrosion treatment for added protection from the elements.
This GE AZ95H18DAC Zoneline Vertical Air Conditioner or VTAC features a heat pump and offers up to 17,000 BTUs for cooling and up to 15,800 BTUs when operated as a Heat Pump. The new AZ95H Series also give you your choice of power supply. The power amperage you choose is directly related to the amount of electric heat you get. Universal power supply kits are available in 20 Amp; 3.45 kW electric heat and 30 Amp; 5.0 kW electric heat options. The AZ95H Series is also equipped with 3 fan speeds. Featured on this unit is the Quick Heat Recovery System. The heat pump incorporates a two stage heat/one stage cooling thermostat that utilizes the resistance heat to bring the room temperature to within 2 degrees of the thermostat set point before initiating the heat pump operation. This helps bring the room up to temperature quickly and allowing for warmer air to be discharged when the heat pump kicks in.
A GE Vertical Air Conditioner (VTAC or Vertical PTAC) helps you optimize floor space because the unit is concealed in a closet with an outside wall rather than out in the open. With hidden installation, the room becomes more aesthetically appealing, giving it more of an at-home appearance, with no limitations on furniture placement or window treatment installation.
Although the VTAC is still a through-the-wall installation, its footprint is only about 24" x 24" and it is hidden inside an enclosure which looks like a closet, versus a standard PTAC unit which is installed in the room taking up over 42" of floor space. The VTAC uses a wall mounted thermostat and has a top air discharge that can be ducted into one or more rooms - perfect for suite set-ups. The design of the new AZ95H models includes a one-piece design, which fully integrates with the wall plenum and aligns for a tight seal. This design eliminates the need for building a customized platform on the construction site. Additionally it uses a Quick-Install Plenum that easily installs from inside the building without the need for exterior building access (caulking required).
REQUIRED COMPONENTS FOR NEW INSTALLATION (each sold separately):
- Drain Platform (RAVDPLAT)
- Plenum or Transition Plenum (RAVWPT15 or RAVTRANS2, 3, 4*)
- Exterior Grille (RAVAL3)
- Return Air Panel / Access Grille (RAVRG4 / RAVRG2)
- Remote Thermostat (RAK149F2, RAK149P2, RAK180W1)
- Power Connection Kit - Supplies power to the unit as well as resistance heat (15 Amp; 2.45 kW - RAK315D, 20 Amp; 3.45 kW - RAK320D, 30 Amp; 5.0 kW - RAK330D). Your choice is included with your purchase.
New features specific to the UltimateV10 VTACs include:
- Chassis Design with Perfect Fit to Insta-Platform™ - One-piece design fully integrates with the wall plenum and aligns for a tight seal
- Self-Contained Drainage System - Easy installation and simple chassis removal while leaving plumbing intact
- Fast-Connect Plumbing - Enables platform build and rough plumbing completed in only minutes
- Quick-Install Plenum (sold separately) - Plenum is easily installed from the interior of building, without the need for exterior access
- Self-Aligning, Lock In Place Platform System - Perfect fit and mistake proof when the chassis is placed on the platform
- Onboard Electronic Error Diagnostics - Electronic controls give clear and fast diagnostics data and fault codes, for quick and easy notifications
- Reverse Cycle Defrost - Exclusive technology increases efficiency, enabling the unit to run in heat pump mode longer
- Anti-Corrosion Design - Exclusive rust-proof basepan and bulkhead provide another level of corrosion protection
- Ultra-Quiet - Delivers quiet cooling power with a smooth sound for a good night’s sleep
- SmartHQ WiFi Capability - Optional WiFi module available separately
Standard features found on the AZ95 Vertical Air Conditioners include:
- Enhanced energy efficiency with 11.1 EER
- Sensible Heat Ratio - 71%
- Central Desk Control Compatibility
- Corrosion Treated
- Auto Power Recovery
- Weather Protected Electrical Components
- Auto Compressor Random Restart
- Automatic Emergency Heat
- Automatic Indoor Frost Control
- Freeze Sentinel
- Heat Sentinel
- Heat Pump with Resistance Heat Backup
- Quick Heat Recovery
- Thermostat Quick Disconnect
- Boost Heat
*When replacing a previous model GE Vertical Units with the new AZ95 Series vertical air conditioner, one of three transition plenums (RAVTRANS2, RAVTRANS3, RAVTRANS4) must be used.
Tech Specs
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
