Product Overview
- R-410A refrigerant used in all models
- Compact (about 2 sq. ft. of floor space)
- Unique free-floating chassis
- Drain pan (required) is included (AVDK18-2401B)
- Easy to connect right, left or rear drain connection
- Corrosion resistant interior
- Easy to install front, left or right hand into closet on an outside wall (Does not require an HVAC technician)
- Remote thermostat ready; 24V transformer
- Standard safety power disconnect
- All units are shipped (on pallet) with return air filter installed
- Electronic control panel on unit for easy diagnostics and servicing
- Architectural louvers required and available in standard extruded aluminum (AVAGK01SB)
- Exterior Wall Adaptors (AVEWA05-08A or ACEWA08-14A), Digital/Manual thermostat (PHWT-A150H) and Digital/Programmable (PHWT-A200) and return air grilles and (AVLWP01A-R or L) are available separately
- No refrigerant lines running from floor to floor
The AVH244 uses a rectangular duct. The duct is 6-55/64" x 20-5/8". A field supplied transition may be required for this unit. The photo shows a round duct but this unit comes with a rectangular duct.
265V | |
---|---|
ELECTRIC HEAT DATA: | |
Watts: | 7500 |
BTUs: | 25600 |
Heating Amps: | 29.7 |
Minimum Circuit Ampacity: | 37.2 |
Branch Circuit Fuse (Amps): | 40 |
Basic Heater Size: | 7.5 kW |
Tech Specs
General Features
Performance @265 Volt
Features
Weights and Dimensions
Electrical Requirements
Electric Heat Performance
WARNING!