Heating > Gas Heat > Vented Heaters > Direct Vent Gas Heaters > Empire Comfort Systems DV-210-SG 10,000 BTU Direct-Vent Wall Furnace

Empire Comfort Systems DV-210-SG 10,000 BTU Direct-Vent Wall Furnace

Product Code:EMPIRE-DV210SG
Price: $762.30

Not Purchasable: Not done configuring

  • Description

    With Empire's DV210 direct-vent wall furnace you get a clean, convenient way to add heat in a cost-efficient manner! The slim, compact design allows it to be installed, out of the way on any outside wall. A vent goes through the wall and out. There is no need for a chimney or flue - just a gas line. The Empire DV-210-SG does not use electricity and is ideal for bedrooms or dens since it vents directly to the outside. At 10000 BTUs, it is a perfect size for smaller rooms. The neutral beige-colored cabinetry will blend into any room and add endless comfort. Plus it is not sitting in the middle of the floor and there are no wires to trip over!

    With a direct-vent heating product, economy is increased by using outside air to support combustion. Inside air is warmed as it re-circulates around a sealed combustion chamber, and this warm air heats the room and reduces drafts. Empire Comfort Systems' Direct-Vent units are ideal where existing flues or chimneys cannot be used. 
    • Will work in the event of a power outage (if a blower is installed, the blower will not function)
    • Total warmth for a fraction of the cost of electric heat
    • Optional automatic blower available (DVB-1 - requires electricity) (Sold Separately)
    • Cost-efficient installation -- no chimney needed
    • Includes standard vent cap, flue outlet and air intake for venting
    This item is available in both Liquid Propane (DV-210-SG-L) and Natural Gas (DV-210-SG-N)

    A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products.  It is highly recommended that you use your own gas technician or gas provider for any repairs.
  • Tech Specs

    Heating BTUs
    Type of Venting
    Direct Vent
    Center of Vent to Floor (in.)
    15.875 "
    Gas Connection Size
    Ignition Type
    Clearance to Side Wall (in.)
    1 "
    Clearance Top to Ceiling (in.)
    12 "
    Clearance Bottom to Floor
    Width (in.)
    16.25 "
    Depth (in.)
    9.375 "
    Height (in.)
    21.375 "
    Net Weight (lbs.)
    Parts Warranty
    1 Year
    Labor Warranty
    Combustion Chamber Warranty
    10 Year
    Vent Opening in Wall (in.)
    6.25 "

  • Manuals and Guides