Heating > Gas Heat > Vent Free Heaters > Empire Comfort Systems SR-30T Vent Free Infrared Gas Heater with Thermostat Control

Empire Comfort Systems SR-30T Vent Free Infrared Gas Heater with Thermostat Control

Empire Comfort Systems Empire Comfort Systems
Availability: Usually Leaves Warehouse in 2 - 3 Business Days
Product Code:EMPIRE-SR30T
Price: $641.70 Sale Price: $579.00

Not Purchasable: Not done configuring

Loading Bread...
Free Shipping on all Orders!
  • Description

    Perfect for heating large areas, the SR30T quickly fills the room with 30,000 BTU of warmth at the touch of a button. The SR-30T has a hydraulic thermostat with top mounted controls for easy operation. And the push button igniter eliminates the need for matches. Gas heaters are more efficient than electric heaters to add heat to your home. In the event of a power outage, a gas heater will continue to provide heat. If there is a blower installed, the blower will not operate during a power outage. Vent free gas appliances are intended for use as secondary or supplemental heat. They should not be used as your primary heat source. If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you.
    • Test-fired in the factory
    • Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
    • Quiet
    • Beige, durable, scratch-resistant finish
    Available in Natural Gas SR-30TN and Liquid Propane SR-30TL

    This gas heater may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes. A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
  • Tech Specs

    Heating BTUs
    Control Type
    Number of Control Settings
    Ignition Type
    Standing Pilot
    Floor Stand Kit
    Wall Mounting Kit
    Gas Connection Size
    Min. Clearance to Combustibles
    Left side 6 inches, Right side 6 inches, Do not install in alcove or closet, Rear wall 0 inches, Ceiling 24 inches, Minimum vertical clearance from a projection above the appliance (shelves, window sills, etc.) 14 inches, Maximum horizontal extension of projection above the appliance 12 inches, Floor (top surface of carpeting, tile, etc.) 2 inches
    Flame Type
    Width (in.)
    24.125 "
    Depth (in.)
    6.5 "
    Height (in.)
    22 "
    Clearance to Side Wall (in.)
    6 "
    Clearance Top to Ceiling (in.)
    36 "
    Clearance Bottom to Floor
    Net Weight (lbs.)
    AHRI, Design Certified
    Parts Warranty
    5 Years
    Labor Warranty
  • Manuals and Guides