Bromic Heating Tungsten Smart-Heat 500 Series Gas Heater
Availability: Usually Leaves Warehouse in 2 - 3 Business Days
Not Purchasable: Not done configuring
Free Shipping on all Orders!
DescriptionBromic’s Tungsten Smart-Heat™ Gas Radiant Heater features an easy pivot arm bracket for directional adjustment of the heat output. The 500 Series has an output of about 43,000 BTUs which should heat an area of about 200 sq. ft. or a spread of about 16' x 13' from the heater. Depending on your establishment's table configuration, this heater might cover about 4 four-tops and 2 two-tops.The Tungsten gas heaters feature a patented direct ignition system which eliminates the need for a standing pilot. The stainless steel construction will give you reliable service and durability for years of use. And the design of the screen and ionization technology ensures effective operation, even in winds of up to 8 mph.With the addition of a ceiling pole (sold separately), which drops down from the ceiling, you can mount two gas heaters back to back at a minimum mounting height of 8'2" from the floor. Wall mounting the Tungsten Smart-Heat has a minimum mounting height of 6'6". Some installations may require a heat deflector depending on distance to combustible materials above. The Tungsten Smart-Heat 500 features 5 heat placques. This heater is is designed for outdoor, commercial or residential use. It is NOT for indoor use.
This Tungsten Smart-Heat 500 Series gas heater is available in Natural Gas (BH0210003) or Liquid Propane (BH0210004).
- Heat Output: 43,000 BTU
- Approximate Area Heated: 200 sq. ft.
- Gas Connection: 1/2" NPT female
- Minimum Distance to Combustible Materials: Sides, 3.6', Ceiling to top of heater - without heat deflector: 3.6'; with heat deflector: 1'2"
- Height: 16.85 in.
- Width: 25.43 in.
- Depth: 18.27 in.
- Installation Type
- Width (in.)
- 25.43 "
- Height (in.)
- 14.25 "
- Depth (in.)
- 14.09 "
- Net Weight (lbs.)
- Assembly Required
Manuals and Guides