White Mountain Hearth Stacked Aged Oak Log Set - Choice of Vent Free Burner
Not Purchasable: Not done configuring
White Mountain Hearth Stacked Aged Oak Refractory Log Set offers a dramatic focal point in a vent-free firebox or a gas equipped fireplace. The mighty Oak trees trunk and branches are echoed in this hand-crafted, 8-piece log set. The log set includes both split and unsplit sections of oak logs, exposing the interior imperfections of a fallen oak tree. Featuring the grayish coloring of aged logs, complete with cracks and splits, this log set which stack impressively on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch firebox without getting lost. Under the Minimum Firebox Requirements Tab you will find sizing details.
With internal ceramic beads forcing the gas to move around inside the burner tubes, the Empire Slope Glaze Burners create a more representative flame pattern, complete with dancing flames through and around the log stack. Vent-free gas logs generate consistent, controlled heat, without the mess, flare-ups and die-downs of a wood-burning fire. Get the look of a wood fire without the hassle of cutting the wood!
Stacked Aged Oak Logs are available in 18" (LS18-SRAO), 24" (LS24-SRAO) and 30" (LS30-SRAO) sizes. To correspond to your log set size, White Mountain Hearth's Slope Glaze Burners are available in 18", 24" and 30" sizes with several valve options to help meet your needs:
- VFSM - Manual (No Remote Available) - operates manually with Off/Pilot/3 position heat setting knob; Cannot be used with wall thermostat or remotes
- VFSR - Millivolt (Remote Available, Not Included) - Standing Pilot, On/Off Remote Ready, Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats - sold separately)
- VFSV - Variable Flame, Height Control (Includes Remote) - Standing pilot with four level flame height control.
- VFSE - Intermittent Pilot (Programmable Remote Included) - Electronic Ignition with Remote Thermostat and Variable Flame Height Control
Both the VFSM (Manual) and VFSV (Variable) models are certified for installation in a vented fireplace. When installed in a vented application, each can only be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A Damper Clamp is included for this purpose.
Your complete set will include the Stacked Aged Oak Logs and Burner/Grate Assembly (size, fuel type and valve chosen), Decorative Rocks, Glowing Embers (rock wool) for burner coverage, Valve Shield (VFSM model) and installation screws and damper clamp. The VFSV and VFSE models will include the Remote Kit.
A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
- Net Weight (lbs.)
- Type of Venting
- Vent Free
- Fireplace Style
- Single Sided
- Log Style
- Stacked Aged Oak
- Size of Log Set (in.)
- 18 "
- 24 "
- 30 "
- Warranty Detail
- Limited 5 Year Parts and Labor Warranty (Except Remote Controls, Thermostats, Accessories and Replacement Parts)
Manuals and Guides
Minimum Firebox Requirements
BTUs (Min./Max.) Req. Min. Rear Width (in.) (A) Req. Min. Depth (in.) (B) Req. Min. Front Width (in.) (C) Req. Min. Height (in.) (D) 18" Slope Glaze Burners VFSM - Manual Valve 22,000 / 32,000 BTUs 21 14 32 17 VFSR- Millivolt Valve 22,000 / 32,000 BTUs
VFSV- Variable Flame Height 21,000 / 32,000 BTUs VFSE- Intermittent Pilot 26,000 / 32,000 BTUs 24" Slope Glaze Burners VFSM - Manual Valve 22,000 / 36,000 BTUs 27 14 34 18 VFSR- Millivolt Valve 25,000 / 36,000 BTUs
VFSV- Variable Flame Height 24,000 / 36,000 BTUs VFSE- Intermittent Pilot 28,800 / 36,000 BTUs 30" Slope Glaze Burners VFSM - Manual Valve 22,000 / 38,000 BTUs 30 14 38 20 VFSR- Millivolt Valve 26,000 / 38,000 BTUs
VFSV- Variable Flame Height 27,000 / 38,000 BTUs VFSE- Intermittent Pilot 30,000 / 38,000 BTUs