A direct-vent fireplace is a sealed fireplace system. It is installed into a wall and vents either through the top or rear. This Superior Pro Series comes complete with a black painted interior, Aged Oak Log Set and Electronic Ignition System (with battery back-up) and is rear vented
. Also included with the fireplace is a bag of volcanic stone and a bag of glowing embers. The fireplace is concealed and features standard tempered glass with barrier screen that meets 2015 requirements. It boasts a clean, full view face with a heat-circulating design.
It comes standard with a painted black interior but there are three additional liner options available (sold separately). A blower and remote can also be purchased separately.
Because it is a gas direct vent fireplace, it will operate during a power outage. If you have a blower, however, the blower will not operate. Standard IPI/CPI switch for easier operation during severe temperatures. Standard on/off and high/low flame control allows you to control the flame in the room from a conveniently located wall switch (provided).
This fireplace uses 4.5"/7.5" Secure Vent Rigid and Flex Direct Vent Components. A termination kit is required to finish off the outside of your system.
Gas Pressure Requirements:
- Inlet Gas Supply Pressure: 11.0" WC (Min.); 13.0" WC (Max.)
- Manifold Gas Supply Pressure: 10.0" WC
- 3/8" NPT Threads
Professional installation by a certified gas technician is required. Models using Propane Gas must be operated with a 100 lb or larger tank and an external regulator with an output of 11 - 13" WC must be used.