Reznor DJ20 201162 High Altitude Kit For Several Reznor 200000 BTU Power Vented and Separated Combustion Heaters

When installing your Reznor heater above 6000 feet (1830 meters), a high altitude kit is required. Several DJ20 kits are available and specific to the Reznor heater you are installing.

The 201162 kit is for installations of the following Reznor Heaters:

• Power Vented Fan-Type Heaters:
  • UDAP-200, UDAP-225, UDAP-250, and UDAP-300
• Separated Combustion Fan-Type Heaters:
  • UDAS-200, UDAS-225, UDAS-250, and UDAS-300
• Power Vented Blower-Type High Static Heaters:
  • UDBP-200, UDBP-225, UDBP-250, UDBP-300, and UDBP-400
• Separated Combustion Blower-Type High Static Heaters:
  • UDBS-200, UDBS-225, UDBS-250, UDBS-300, and UDBS-400

Please note if you are installing your Reznor Heater above 2000 feet the input rate must be derated. This is done simply by adjusting the valve outlet (see installation manual). You do not need to install anything further.