The Ouellet programmable thermostat can be used with electric heaters. It is an electronic proportional pulsing line voltage wall thermostat*. It can be used with Ouellet ORC Radiant Cove Heaters, baseboard heaters, convector and fan-forced convectors. It is rated for 16.7 Amps at 120, 208, and 240 Volts, with a minimum load of 1.25A. It CANNOT be used with 277 Volt heaters.
The thermostat is white and has a white LED backlit display. It offers temperature display in C° or F°. The temperature setting range is from 41°F - 86°F (5°C - 30°C). The non-programmable thermostat does have a night light mode for the LED display and it gives you the ability to set minimum and maximum setpoints. Additionally, in the event of a power failure, the setpoints are recorded permanently so there is no need to have to re-set them.
The OTH4000P features early start of the heating period and allows for programming up to 4 periods a day. Modes include Automatic, Manual, Economy, Freeze and Standby. The 2-wire thermostat is easy to install.
*10 minute (fan-forced convector) or 15 second cycle (convector).