Ouellet OTH4000 Non-Programmable Line Voltage Wall Thermostat

Usually Leaves Warehouse in 1 - 2 Weeks
Sku:
OUELLET-OTH4000
The Ouellet non-programmable thermostat can be used with electric heaters. It is an electronic proportional pulsing line voltage wall thermostat*. It can be used with Ouellet ORC Radiant Cove Heaters, baseboard heaters, convector and fan-forced convectors. It is rated for 16.7 Amps at 120, 208, and 240 Volts, with a minimum load of 1.25A. It CANNOT be used with 277 Volt heaters.
 
The thermostat is white and has a white LED backlit display. It offers temperature display in C° or F°. The temperature setting range is from 41°F - 86°F (5°C - 30°C). The non-programmable thermostat does have a night light mode for the LED display and it gives you the ability to set minimum and maximum setpoints. Additionally, in the event of a power failure, the setpoints are recorded permanently so there is no need to have to re-set them.
 
The 2-wire thermostat is easy to install.
 
*10 minute (fan-forced convector) or 15 second cycle (convector).
 
$92.00
Ouellet OTH4000 Non-Programmable Line Voltage Wall Thermostat
Customer Reviews
FREE SHIPPING ON ALL ORDERS!
The Ouellet non-programmable thermostat can be used with electric heaters. It is an electronic proportional pulsing line voltage wall thermostat*. It can be used with Ouellet ORC Radiant Cove Heaters, baseboard heaters, convector and fan-forced convectors. It is rated for 16.7 Amps at 120, 208, and 240 Volts, with a minimum load of 1.25A. It CANNOT be used with 277 Volt heaters.
 
The thermostat is white and has a white LED backlit display. It offers temperature display in C° or F°. The temperature setting range is from 41°F - 86°F (5°C - 30°C). The non-programmable thermostat does have a night light mode for the LED display and it gives you the ability to set minimum and maximum setpoints. Additionally, in the event of a power failure, the setpoints are recorded permanently so there is no need to have to re-set them.
 
The 2-wire thermostat is easy to install.
 
*10 minute (fan-forced convector) or 15 second cycle (convector).
 
  • Installation Type:
    Wired
  • Control Type:
    Digital
  • Type:
    Line-Voltage
  • Touchscreen:
    No
  • Programmable:
    No
  • Use with Heat Pump:
    No
  • Use with Gas/Oil:
    No
  • Use with Electric Furnace:
    Yes
  • Backlit Display:
    Yes
  • Auto Changeover:
    No
  • WiFi Ready:
    No
  • Width (in.):
    4.5
  • Depth (in.):
    1.25
  • Height (in.):
    5
  • Warranty:
    3 Year Limited