Modine PDP250AE0130 250,000 BTU Vertical Powered Vented Unit Heater - 115V - NG

Sku:
MODINE-PDP250AE0130
Please Call (877) 847-0050 for Availability
$2,699.00
Featuring 82% thermal efficiency, these unit heaters use a collector box and power exhauster for maximum seasonal efficiency. With 250,000 BTUs input / 205, 00 BTUs output, the PDP250AE0130 can be vented vertically or horizontally and the power exhaust can be rotated a full 180°. These units are designed to use the smallest diameter vent pipe possible.
 
The PDP series features a 100% shut off, automatic restart and intermittent pilot that allows for continuous retry. If the pilot does not light, the system will continue to try to light every 6 minutes for 3 tries. After 3 tries, the system is locked out for an hour and then it tries the cycles again. Installed as standard equipment on all PDP units is the Time Delay Relay which warms up the heat exchanger for 30 - 90 seconds before the blower starts, allowing for whatever residual cool air is in the exchanger to be warmed up before being blown into the space.
 
Other standard features include:
  • Single Stage Gas Valve
  • Time Delay Relay
  • Low Voltage Terminal Board
  • Control Step Down Transformer
  • High Limit Switch
  • Pressure Switch
  • Power Exhauster

The Modine PDP250AE0130 is Natural Gas.

FREE SHIPPING ON ALL ORDERS!
Modine PDP250 250,000 BTU Vertical Powered Vented Unit Heater 115V

Product Overview

Featuring 82% thermal efficiency, these unit heaters use a collector box and power exhauster for maximum seasonal efficiency. With 250,000 BTUs input / 205, 00 BTUs output, the PDP250AE0130 can be vented vertically or horizontally and the power exhaust can be rotated a full 180°. These units are designed to use the smallest diameter vent pipe possible.
 
The PDP series features a 100% shut off, automatic restart and intermittent pilot that allows for continuous retry. If the pilot does not light, the system will continue to try to light every 6 minutes for 3 tries. After 3 tries, the system is locked out for an hour and then it tries the cycles again. Installed as standard equipment on all PDP units is the Time Delay Relay which warms up the heat exchanger for 30 - 90 seconds before the blower starts, allowing for whatever residual cool air is in the exchanger to be warmed up before being blown into the space.
 
Other standard features include:
  • Single Stage Gas Valve
  • Time Delay Relay
  • Low Voltage Terminal Board
  • Control Step Down Transformer
  • High Limit Switch
  • Pressure Switch
  • Power Exhauster

The Modine PDP250AE0130 is Natural Gas.

Tech Specs

General Features

Installation Type:
Ceiling Mount
Fuel Type:
Natural Gas (NG)
Certified Usage:
Commercial (Indoor Only)
Separated Combustion Chamber:
No

Performance

Heating BTUs (Input):
250000
Heating BTUs (Output):
207500

System Data

Noise Level (dBA):
NA
Thermal Efficiency:
82%
CFMs:
3700
Output Velocity (FPMs):
1053
Discharge Air Temperature Rise (°F):
50
Discharge Air Opening Area (ft²):
NA

Connections

Gas Connection Size:
1/2"
Vent Connection Size (in.):
6"

Clearances

Top to Ceiling (in.):
5"
Bottom to Floor (ft.):
1'
To Side Wall (in.):
1"
Access Panel (in.):
18"
Flue / Vent Connector (in.):
7"

Weights and Dimensions

Width (in.):
25.625
Depth (in.):
25
Height (in.):
40.25
Net Weight (lbs.):
239

Electrical Requirements

Voltage:
110-120V
Amps:
7.75
Circuit Breaker Size (Amps):
15
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Product Warranty

Heat Exchanger: 10 Years