Evaporator coils are used in conjunction with split air conditioner systems - with or without heat pumps. The CHPF series of evaporator coils can be installed for use in a horizontal configuration. A horizontal flow installation takes the air in on one side and exhausts it out the other. This type of unit can be installed anywhere - upstairs or downstairs since the air moves laterally. The Goodman CHPF series coils are cased coils and feature a flowrater valve. This type of valve has a fixed orifice and is constructed to deliver a fixed amount of refrigerant to the coil, regardless of conditions. Evaporator coils are for use split system air conditioner condensers as well as heat pump systems. As noted in the item code, it can be used with two different tonnages. The CHPF2430B6 can be used with 24,000 (2 ton) to 30,000 (2.5 ton) BTU systems. The flowrater/orifice is for use with the larger tonnage - in this instance 2.5 tons. For use with a 2 ton system a different orifice/flowrater is required (unless a TXV is required instead).
All Goodman coils feature an all-aluminum tube and fin coil design. The use of single metal construction and a grooved tube help to provide the utmost in heat transfer efficiency. Aluminum is also used to help resist potential corrosion. The cabinet is finished in the same galvanized, leather grain-embossed finish as other Goodman system components. Foil-faced insulation covers the casing inside to reduce cabinet moisture. A split seam is located on the front of the cabinet for easy access. Thermoplastic drain pans resist rust and the fading effects of UV rays. They are constructed of DecaBDE-free thermoplastic and have a low water-retention design.
The CHPF series of evaporator coils can be installed for use in a horizontal configuration. A horizontal flow installation takes the air in on one side and exhausts it out the other. This type of unit can be installed anywhere - upstairs or downstairs since the air moves laterally. The CHPF2430B6 evaporator coil uses either R22 or R410A refrigerants.
- Nominal Cooling Tons: 2.0 - 2.5
- Service Valve Liquid Connection Size: 3/8"
- Service Valve Suction Connection Size: 3/4"
- Nominal Height for Gas Furnace: 17.5"
- Plenum Depth: 19.0"; Plenum Height: 16.5"
- Dimensions: 21.125"d x 26.0"w x 17.5"h
Cased evaporator coils are typically used for new comfort system installations including a new furnace. They must be paired with the condenser unit in a split system - with or without a heat pump, as well as match the furnace for a proper/exact fit. Uncased coils are typically used in replacement installations in which you are inserting the coil into pre-existing ductwork.
The 21 1/8" deep cabinet is engineered to make installing the evaporator coil in an attic easy.. Professional installation by an HVAC installer is required. An HVAC technician will have the knowledge and tools required to make sure your new system is up and running properly.
Goodman evaporator coils are designed and assembled in the USA. They have a 10 year parts limited warranty and are AHRI Certified and ETL Listed.
- Cooling Capacity (Tonnage):
- 2 - 2.5 Tons
- Plenum Opening - Depth (in.):
- Plenum Opening - Height (in.):
- Nominal Furnace Height (in.):
- TXV Installed:
- Installation Type:
- Service Valve Liquid (in.):
- Service Valve Suction (in.):
- Height (in.):
- Width (in.):
- Depth (in.):
- AHRI Certified; ETL Listed
- Parts Warranty:
- 10 Years